Specifications

2. Measurement Parameter Editor
2011-03 Instructions for Use for i-control No. 30018668 Rev. No. 1.8 25
Cuvette
The Cuvette program element allows performing absorbance measurement in
fixed wavelength and scan mode. This option is only available for the
Infinite M200 and M200 Pro.
2.2.2 Measurements
For detailed information on measurement methods, refer to the respective
Instructions for Use of the instrument connected.
Absorbance
The Absorbance program element is used to perform absorbance
measurements. Enter or select the respective parameters:
• Wavelength
• Reference
• Read/Flash
• Multiple Reads per Well
• Label
The Reference wavelength may be selected to correct for flash variations.
For filter instruments, two drop-down lists display the available measurement and
reference filter wavelengths, according to the inserted absorbance filter slide. If
the drop-down lists are empty, the absorbance filter either has not been inserted
into the reader or has not been defined.
Example for the Infinite 200
Example for the Infinite F50