Specifications

2. Measurement Parameter Editor
2011-03 Instructions for Use for i-control No. 30018668 Rev. No. 1.8 23
Miscellaneous
Comment
User Request
Wait for Temperature
Wait (Time)
Incubation
2.2.1 Lab Ware
Plate
The Plate program element is used to select a plate format from the Plate
definition drop-down list. Click Details... to see further information on the
selected plate.
If a plate with cover is used, select the Plate with cover checkbox.
The measurement will automatically measure all selected wells of the plate. If you
want to measure a specific well or a range of wells, click the link
Use a part of the
plate in the lower right corner. See Part of Plate below.
Under Details… it is possible to apply a filter so that only certain plate definition
files are shown.
The Infinite F500 and M1000 may optionally be equipped with a barcode
scanner. Select the checkbox Read Barcode to have the barcode read.
The Read Barcode checkbox appears only if the instrument has a barcode
reader or if a stacker is connected and has a barcode reader. For further details
on the Barcode Scanner option refer to the Instructions for Use of the respective
instrument manual.