Specifications

2. Measurement Parameter Editor
22 Instructions for Use for i-control No. 30018668 Rev. No. 1.8 2011-03
The Measurement Parameter Editor consists of the following items which are
described in detail in the subsequent chapters:
• Menu bar • Status bar
• Tool bar • Workflow pane
• Control bar • Info pane
In the left bottom corner of the main window, two tabs appear:
Standard: is displayed for standard applications
Application: is displayed for applications with NanoQuant plates which are
currently only available with the Infinite 200, Infinite 200 Pro, Infinite F 500
(DNA quantification only) and Infinite M 1000 available for FW 2.0 and higher
(Ref 30061442).
Please consult the Quick Guide for NanoQuant Plates and the respective
Instructions for Use of the instrument connected.
2.2 Control Bar
The Control bar is divided into five sections. Each section contains program
elements used to create an individual workflow. Depending on the instrument
connected and the modules installed, these available program elements may
vary; e.g. if the instrument is not equipped with an FP module, the FP element is
not visible in the measurement section.
Create a workflow either by double-clicking the selected program element or by
dragging and dropping it into the workflow pane.
The following program elements are available:
Lab Ware
Plate
Part of Plate
Well
Cuvette
(M200 and M200 Pro)
Measurements
Absorbance
Absorbance Scan
(M200, M200 Pro and M1000)
Fluorescence Intensity
Fluorescence Intensity Scan
(M200, M200 Pro and
M1000)
Fluorescence Polarization
(F200, F200 Pro, F500 and
M1000)
Luminescence
Luminescence Dual Color
Luminescence Scan (M1000 – available for FW 2.0
and higher - Ref 30061442)
Actions
Temperature
Shaking
Injection
Dispense
Move Plate
Move Cuvette
(M200, M200 Pro)
Kinetic
Kinetic Cycle
Kinetic Condition