Specifications

1. Introduction
10 Instructions for Use for i-control No. 30018668 Rev. No. 1.8 2011-03
1.3 Software Installation
CAUTION
YOU MUST HAVE ADMINISTRATIVE RIGHTS TO INSTALL THE
SOFTWARE.
CAUTION
INSTALL THE SOFTWARE BEFORE PLUGGING THE INSTRUMENT
INTO THE COMPUTER.
The i-control software is installed using the following procedure:
1. Insert the installation CD into the appropriate disk drive or CD ROM drive.
2. Open the Windows Explorer and browse to folder Software on the
installation CD. Double-click i-Control <version>.exe to start the
installation procedure.
3. First of all Setup Prerequisites have to be installed:
Depending on your operating system different prerequisites have to be
installed. Click Next to continue.
4. A message box indicates that the prerequisites have been installed
successfully. Click OK to continue.