Specifications

Transmitter M200 easy 48

Printed in Switzerland 52 121 501

9.4 Set/Clear Lockout

(PATH: Menu/System/Set/Clear Lockout)

This menu enables/disables the Lockout functionality of the transmitter. The user will be asked

for a password before being allowed into any menus if the Lockout functionality is enabled.

The Lockout – Menu is protected: Enter the Administrator Password and select YES to enable or

NO to disable the Lockout functionality. Pressing the [ENTER] key after the selection will bring up

the Save Changes dialog. Selecting No will discard the entered value, selecting Yes will make

the entered value the current one.

9.5 Reset

(PATH: Menu/System/Reset)

This Menu allows access to the following options:

Reset System, Reset Analog Cal.

9.5.1 Reset System

This Menu allows the reset of the meter to the factory default settings (Setpoints off, analog

outputs off, etc.). The meter calibration and the analog output calibration are not affected.

Pressing the [ENTER] key after the selection will bring up a conﬁrmation screen. Selecting No

will return the user to the Measurement mode with no changes. Selecting Yes will reset the meter.

9.5.2 Reset Analog Calibration

This Menu allows reset of the Analog Output calibration factors to the last factory calibration

values.

Pressing the [ENTER] key after the selection will bring up a conﬁrmation screen. Selecting No

will return the user to the Measurement mode with no changes. Selecting Yes will reset the

Analog Output calibration.