Specifications

MODEL ELEMENT VOLTS AMPS kW FIELD WIRING
HC1006 Single 7” 120 V 1ø 11.7 A 1.4 kW 14 ga. 75ºC
HC1256 Single 9” 208 V 1ø 9.0 A 1.9 kW 14 ga. 75ºC
240 V 1ø 10.4 A 2.5 kW 14 ga. 75ºC
HC2256 Dual 9” 208 V 1ø 18.1 A 3.8 kW 10 ga. 75ºC 3ø versions available
Refer to Installation
240 V 1ø 20.8 A 5.0 kW 10 ga. 75ºC Guide for details
NOTE: See installation guide for cutout dimensions
SPECIFICATIONS
WARRANTY xi
SPECIFICATIONS 1
FEATURES & OPERATING CONTROLS 2
PRECAUTIONS & GENERAL INFORMATION 3
INSTALLATION 4
OPERATION 5
CLEANING INSTRUCTIONS 6
SPECIAL CARE INSTRUCTIONS 7
TROUBLESHOOTING 8
EXPLODED VIEW & PARTS LIST 10-15
WIRING DIAGRAM 16-17
PARTS & SERVICE 21
CUSTOMER SERVICE DATA 21
Thank You for purchasing this Wells Bloomfield appliance.
Proper installation, professional operation and consistent maintenance of this equipment will ensure that it
gives you the very best performance and a long, economical service life.
This manual contains the information needed to properly install this equipment, and to use and care for
the equipment in a manner which will ensure its optimum performance.
TABLE OF CONTENTS
MODEL ELEMENT VOLTS AMPS kW FIELD WIRING
HC1256EU Single 9” 220-240V 1ø 10.4 A 2.5 kW 1.5 mm
2
HC2256EU Dual 9” 220-240V 1ø 20.8 A 5.0 kW 2.5 mm
2
Refer to the Export Manual for this equipment (p/n 301399 )for specific information.
SPECIFICATIONS — EXPORT MODELS
INTRODUCTION
1
224 p/n 2M-303756 Owners Manual Built-In Ceramic Hotplate