222 WELLS MANUFACTURING 10 Sunnen Dr., St. Louis, MO 63143 telephone: 314-678-6314 fax: 314-781-2714 www.wellsbloomfield.
LIMITED WARRANTY STATEMENT Unless otherwise specified, all commercial cooking equipment manufactured by Wells Manufacturing is warranted against defects in materials and workmanship for a period of one year from the date of original installation or 18 months from the date of shipment from our factory, whichever comes first, and is for the benefit of the original purchaser only. prices charged by Wells Manufacturing for its products are based upon the limitations in this warranty.
TABLE OF CONTENTS WARRANTY SPECIFICATIONS FEATURES & OPERATING CONTROLS PRECAUTIONS & GENERAL INFORMATION AGENCY APPROVAL INFORMATION INSTALLATION OPERATION CLEANING INSTRUCTIONS TROUBLESHOOTING EXPLODED VIEW & PARTS LIST PARTS & SERVICE WIRING DIAGRAM CUSTOMER SERVICE DATA xi 1 2 3 3 4 5 6 7 8 12 - 17 18 - 19 19 INTRODUCTION Thank You for purchasing this Wells Manufacturing appliance.
FEATURES & OPERATING CONTROLS Element Support Heating Element Drip Pan Heating Element (Lifted) Name Plate Wellslok Indicator Light Hotplate Unit Temperature Control IL2187 Control Unit WELLSLOKS Heating Element HOTPLATE UNIT: Provides heat for food preparation Coil-type elements rotate for access to drip pan Note: Solid (french plate) elements on model H-706 do not lift Element Support* Drip Pan* Wellslok Holds coil-type element in proper position Collects drippings and holds element support.
PRECAUTIONS AND GENERAL INFORMATION This appliance is intended for use in commercial establishments only. This appliance is intended to prepare food for human consumption. No other use is recommended or authorized by the manufacturer or its agents. Operators of this appliance must be familiar with the appliance use, limitations and associated restrictions. Operating instructions must be read and understood by all persons using or installing this appliance.
INSTALLATION UNPACKING & INSPECTION Carefully remove the hotplate from the carton. Remove all protective plastic film, packing materials and accessories from the hotplate before connecting the hotplate to electrical power or otherwise performing any installation procedure. Carefully read all instructions in this manual and the Installation Instruction Sheet packed with the hotplate before starting any installation. Read and understand all labels and diagrams attached to the hotplate.
OPERATION GENERAL OPERATIONAL NOTES CAUTION: Carefully read the description of the hotplate operation on the specification sheet. DO NOT attempt to perform any maintenance or service unless the hotplate is disconnected from electrical power. DO turn the circuit breaker for the hotplate off before cleaning, HOT SURFACES Exposed surfaces can be hot to the touch and may cause burns. servicing or performing any maintenance. DO NOT use sharp objects or metal implements to clean the heating element(s).
CLEANING INSTRUCTIONS CAUTION: PREPARATION ELECTRIC SHOCK HAZARD Unplug or disconnect hotplate from electrical power before cleaning. Allow hotplate to cool completely before cleaning. CAUTION: BURN HAZARD Allow hotplate element and cabinet to cool completely before cleaning. CAUTION: ELECTRIC SHOCK HAZARD Do not submerge hotplate in water.
TROUBLESHOOTING SYMPTOM Hotplate won’t heat One or more sections won’t heat Hotplate not hot enough POSSIBLE CAUSE SUGGESTED REMEDY Disconnect OFF or circuit breaker tripped Turn disconnect ON Check / reset circuit breaker Temperature control not on Turn temperature control to desired setting Damaged temperature control, element or other internal component Contact Authorized Wells Service Agency for repairs Temperature control not set Adjust for desired temperature Operating 208/240V unit at 12
EXPLODED VIEW: H336 H336 BUILT-IN ELECTRIC HOTPLATE - 208/240V - SPIRAL ELEMENT 2.1 2.2 2 1 2.3 3 6 7 9 10 5 11 Model: H336 Built-In Electric Hotplate - 208/240V Spiral Element PL222 IL1799 Rev.
PARTS LIST: H336 H336 Built-n Electric Hotplate, Spiral Element Fig No Part No Qty Description 2C-33977 2 SCREW, 8-32X3/8-PHBNDHD 2 WS-50293 1 ELEMENT ASSY KIT, 240V @ 2600W 2.1 2N-30293ELUL 1 ELEMENT 240V 2600W 2.2 2P-6468 1 RING-ELEMENT ADAPTOR 2.
EXPLODED VIEW: H636 H-636 BUILT-IN ELECTRIC HOTPLATE - 208/240V - SPIRAL ELEMENT 3 4 5 1 2 6 7 8 7 14 15 13 16 11 17 6 18 Nameplate Model: H636 Built-In Electric Hotplate - 208/240V Spiral Element PL222 IL1800 Rev.
PARTS LIST: H636 H636 Built-n Electric Hotplate, Spiral Element Fig No Part No Qty Description 2C-33977 4 SCREW, 8-32X3/8-PHBNDHD 2 WS-50293 2 ELEMENT ASSY KIT, 240V @ 2600W 3 2N-30293ELUL 2 ELEMENT 240V 2600W 4 2P-6468 2 RING-ELEMENT ADAPTOR 5 2D-30293DT 2 DRIP TRAY 6 2C-31697 4 SCREW, 8-32X3/16 PH RD HD 7 2K-37748X 2 FTG CONDUIT STRAIGHT 3/8 8 E7-49046 1 BOX OUTLET 9 WS-50131 1 TERM BLK KIT-3 POLE, 85AMP 10 2C-35736 2 NUT 8-32 HEX 11 2C-41974 2 NUT 8-32 HEX 7
EXPLODED VIEW: H706 H-706 BUILT-IN ELECTRIC HOTPLATE - 208/240V - SOLID (FRENCH PLATE) ELEMENT 1 2 3 17 4 5 6 6 10 9 7 3 16 5 15 5 13 12 11 14 Model: H706 Built-In Electric Hotplate - 208/240V Solid (French Plate) Element PL222 IL1801 Rev.
PARTS LIST: H706 H706 Built-In Electric Hotplate, French Plate 222 p/n 2M-303734 Owners Manual Built-In Hotplates Fig No Part No Qty Description 1 WS-503973 2 ELEM HPLATE UPGRADE FUSED 2 WS-503972 2 HPLATE UPGRADE CRACKED CE 3 2C-33935 8 SCREW 6AB X 5/16 PH PAN SMS 4 2C-31053 2 NUT 8-32 KEPS MS NICKEL 5 2C-31697 4 SCREW 8-32X3/16 PH RD HD 6 2K-37748X 2 FTG CONDUIT STRAIGHT 3/8 7 2C-31053 6 NUT 8-32 KEPS MS NICKEL 8 WS-50385 2 LIGHT SIGNAL RED PUSH ON 9 2E-30562 2 SW
WIRING DIAGRAM 222 p/n 2M-303734 Owners Manual Built-In Hotplates WIRING DIAGRAM ELECTRIC COUNTERTOP HOTPLATES H-336 14
WIRING DIAGRAM 222 p/n 2M-303734 Owners Manual Built-In Hotplates WIRING DIAGRAM ELECTRIC COUNTERTOP HOTPLATES H-636, H-656 and H-706 15
222 p/n 2M-303734 Owners Manual Built-In Hotplates NOTES 16
PARTS & SERVICE DESCRIPTION SERVICE PART NO. Drip Tray, 8” for H-636 2D-30293DT IMPORTANT: Use only factory authorized service parts and replacement filters. For factory authorized service, or to order factory authorized replacement parts, contact your Wells authorized service agency, or call: Wells Manufacturing 10 Sunnen Dr., St. Louis MO 63143 USA Service Dept.
WELLS MANUFACTURING 10 Sunnen Dr., St. Louis, MO 63143 telephone: 314-678-6314 fax: 314-781-2714 www.wellsbloomfield.
