Operating instructions

GRIDDLE
29
SV509 SvcManual WVOC-G136
GRIDDLE SECTION - ELEMENT CLAMPING DIAGRAM
SV502 SvcManual WVG-136(RW)
GRIDDLE SECTION - TROUBLESHOOTING SUGGESTIONS
DESCRIPTION POSSIBLE PROBLEM SUGGESTED REMEDY
Griddle will not heat Hood section not "ON"
Verify that Hood Power Switch is
"ON". If "SERVICE REQUIRED"
indicator is lit, rectify filter problem.
One section does not
heat
Temperature control knobs not set to
desired temperature
Set to desired temperature
Damaged internal component
Check thermostats, elements, wiring
and jumpers. Replace damaged com-
ponents, and repair wiring and loose
connections as required.
Griddle drips grease
Grease drawer full or not installed
Empty grease drawer.
Clean grease build-up from sleeve
and install drawer properly
Damaged internal component
Verify all seams properly sealed.
Verify grease drawer and handle
properly assembled.
Replace grease tray if required
51969
51969
51969
51969
51969
51969
51968 51968 51968 51968 51968
51972 51972
52028
53474
ELEMENT RETAINER STUD LOCATION
50496 HEATING ELEMENT 240V208/
51968
FRONT
51969
5202852028
52028
53474
53474
51969
53474
52054
52054
53474
53474
52054
52054