MODELS F-49 RT and F-58 RT PASTA RETHERMALIZERS INSTRUCTIONS Installation Operation Maintenance WELLS MANUFACTURING COMPANY P.O. BOX 290 VERDI, NEVADA 89439 (702) 345-0444 FAX 702-345-0569 ITEM NO.
TABLE OF CONTENTS DESCRIPTION PAGE Warranty 3 Shipping Damage Claim Procedure Specification Information/Features 4 4 Warnings! 5 Installation Instructions Operating Instructions 6 7-8 Cleaning Instructions 8 Warranty Exclusions 9 2
WARRANTY STATEMENT All commercial cooking equipment manufactured by WELLS is warranted against defects in materials and workmanship for a period of one year from the date of original installation or 18 months from the date of shipment from our factory, whichever comes first and is for the benefit of the original purchaser only, except that; a.
SHIPPING CLAIM PROCEDURE: For your protection, please note that equipment in this shipment was carefully inspected and packed by skilled personnel before leaving the factory. The transportation company assumes full responsibility for safe delivery upon acceptance of this shipment. IF SHIPMENT ARRIVES DAMAGED: We cannot assume responsibility for damage or loss incurred in transit. We will, however, be glad to furnish you with the necessary documents to support your claim. 1.
WARNINGS! FOR YOUR SAFETY Wells pasta rethemalizers are equipped with a threeprong electrical plug. This three-prong plug is part of a system that will protect you if something goes wrong with the electrical wiring in the unit. Be sure the three-prong plug is plugged into a matching threeprong socket. DO NOT cut or break off the large third prong in this plug, or the protective system will not work. IMPORTANT! Make sure incoming voltage is the same as unit is rated for.
INSTALLATION INSTRUCTIONS; 1. Remove unit carefully from carton. 2. IMPORTANT: Read all Installation Instructions carefully BEFORE starting installation. 3. It is the responsibility of the installer to comply with local codes. 4. Carefully place unit on a suitable countertop or table. 5. MAKE SURE THAT INCOMING VOLTAGE IS THE SAME AS UNIT IS RATED FOR. 6. Any installation not matching the specifications discussed in this manual will void the unit's warranty.
OPERATING INSTRUCTIONS: Model F-49 RT: 1. Pour approximately 9 quarts of water into water pot and fill to level lines stamped on sides of the pot. 2. Lower elements into pot. Rotate thermostat dial to the proper temperature setting and allow unit to preheat. The temperature light will turn OFF when preheating is complete and the water has reached the set temperature. 3. Load one to four portion baskets with food product. Fill baskets no more than 1/2 full.
6. Keep unit clean at all times. Always rinse baskets and water pot thoroughly to prevent contamination. 7. Refill pot with clean water if starch build-up is excessive. Allow water to cool before removing pot. CLEANING INSTRUCTIONS; DAILY CLEANING: 1. Turn temperature control and power switch (F-58 RT only) to the OFF position and unplug unit. 2. Remove racks and baskets, and swing heating elements up and out of water pot.
WELLS MANUFACTURING COMPANY SERVICE POLICY AND PROCEDURE GUIDE ADDITIONAL WARRANTY EXCLUSIONS 1. Resetting the safety thermostats, circuit breakers, overload protectors, or fuse replacements unless warranted conditions are the cause. 2. All problems due to operation at voltages other than specified on equipment nameplates conversion to correct voltage must be the customer's responsibility. 3.
WIRING DIAGRAM FOR F-49RT 208V OR 208/240V SINGLE PHASE HEATING ELEMENT HEAD ASSY DISCONNECT TILT SWITCH 13 215°F CONTROL THERMOSTAT 10 10 9 9 HEAT LIGHT (AMBER) TROUBLE LIGHT (RED) WATTS VOLTS AMPS PER PHASE 3.5/4.6 KW 208/240 16.6/19.1 4.6 KW 208 22.
WIRING DIAGRAM FOR F-58RT 208 OR 240 VOLT, SINGLE PHASE HEATING ELEMENT LIFT MOTOR SWITCH HEAD ASSY N.O. 28 COM. 43 FUSE (2) 10 AMP N.C. 28 1 35 9 FUSEHOLDER (2) 34 33 TROUBLE LIGHT (RED) 2 DISCONNECT TILT SWITCH 9 10 M LIFT MOTOR 9 PUSH TIMER POWER SUPPLY CORD NEMA 6-30P N.O. COM. 13 32 N.C. 15 10 43 215º CONTROL THERMOSTAT 10 1 10 2 HEAT LIGHT (AMBER) WATTS VOLTS 4.32 kW 208 20.8 5.75 240 24.
