Instruction manual

OUTPUT SIGNALS
FOR RASTER SCAN MONITORS
SYNC OUTPUTS
H
H
V
V
o to 5V TTL
Horizontal
Horizontal Inverted
Vertical
Vertical Inverted
FREQUENCY WIDTH
15.625 KH
4J1S
15.625 KHz
61.0 Hz 1.0 msec
61.0 Hz
1.0 msec
Minimum monitor input
on these signal lines 1 Kn
GUN OUTPUTS
R
G
B
o to 4V TTL Compatible - High level adjustable 0
to 4V BRIGHTNESS control
Red
Green
Blue
Each may
be turned
on
or off using GUN CON-
TROL pushbuttons
Minimum monitor input on these signal lines 15m2
FOR
X-V MONITORS
SIGNAL OUTPUTS
x
Y
GUN OUTPUT
R
G
B
to ±4V to ±10V using X-V SIZE con-
trol Minimum monitor input resistance 150n
to ±3V to ±7.5V using X-V SIZE con-
trol. Minimum monitor input resistance 150n
o to +4V TTL Compatible - High level adjustable
o to +·4 V BRIGHTNESS control except
Scale)
Red
Green
Blue
Each signal may
be turned
on
or off using GUN CON-
TROL pushbutton,
Minimum monitor
on these signal lines 150n
-3-
EXTENDER CABLE
MONITOR ADAPTERS
A
B
C
D
OUTPUT CONNECTOR
VARI-TRAKER
FUNCTIONS
RANGE
DC VOLTS
AC VOLTS
8 foot, extends output connector
venient
MONITOR
ADAPTERS,
Four (4) supplied (see ADAPTERS
for connections).
Mates
to most WELLS GARDNER and
ELECTROHOME RASTER SCAN
(6 pin Molex 09-50-7061).
Mates
to most ELECTROHOME COLOR
X-Y monitors (6 pin Molex 09·50·7061).
Mates
to many WELLS GARDNER and
ELECTROHOME B/W X·y monitors.
Mates
to most WELLS GARDNER COLOR
X·Y monitors.
Located on rear panel.
All are present
on SCAN
MODE.
shown on on
rear panel. connector Molex Part No,
03-09-3092. Pins Molex Part
No. 02·09·2116
(2 extras supplied).
AC and
DC
OHMS
50 volts
input.
DC
fre-
quency tone.
-4-