User manual

26xx Technical Manual EN-V106d
7
LAN (1-4) This will light up green when the gateway’s LAN port 1-4 is
physically connected to a local network (Refer to Rear Panel
section in page number for location of LAN port 1-4). When
data is transmitted through this port, it will flash green.
The default IP of LAN port is 192.168.123.123.
T1-T8 The status LED for FXS port 1-8, this will light up amber
orange when the connected phone’s handset is lifted, or when
the connected phone is engaged in a conversation. It will
flash amber orange when there is an incoming call.
L1-L8 The status LED for FXO port 1-8. When there is no PSTN
connected, this LED will become blinking. when PSTN is
connected and no talking, the LED will be off. When a line is
using, the LED will become light up.
2.2 Rear Panel: LED Indicators
Wellgate 2608
Wellgate 2680
Wellgate 2644
Item Description
Reset Press and hold over 5 seconds to reload factory default
setting, this will erase all the settings configured on the
gateway.
T1-T8 The RJ-11 FXS port 1-8, connects analog phone sets, trunk