User manual

26xx Technical Manual EN-V106d
75
Example 3
This configuration shows an example for P2P calling to a representative number.
When a PSTN call is coming to 2680 FXO port, it will start the call routing and
make the p2p call to the representative number of 2608 which provides serial line
hunting. The same as 2608 to route to 2680’s representative number.
A. Configuration 2608
Step 1:
Check the primary proxy and representative number enable option, then setup
the required parameters of the representative number. Apply it.
Since the P2P call will be used for this representative number, uncheck the
primary proxy and apply it.