User manual

26xx Technical Manual EN-V106d

3.5 Management

3.5.1 Provision Server

Note: The provisioning server is supported by working with WellEMS 9510 only.

. If you need this requirement, Please contact Welltech for availabilities.

Provision server Mode Enable/Disable provision function

Provision server IP address Specify the Provision Server’s IP

address.

Provision server port Specify the Provision server port

Provision cycle time Specify the cycle time of the

provisioning.(unit: sec)

Provision default time Specify a scheduled time in a day

1. Press the “Apply” button (at the bottom) after you finish to save changes.

2. Press the “Reboot” button to apply the changes.