User manual

26xx Technical Manual EN-V106d
47
and Off time for tone 1 and 2.
ROH Tone (FXS only) Specify the pattern of the ROH Tone,
you can adjust the high frequency, low
frequency, high level, low level, the On
and Off time for tone 1 and 2. The
ROH tone is a single high frequency
tone used to warn users that their
phone is not placed on-hook (hang up)
correctly.
Disconnect tone 1 Specify the pattern of the disconnect
tone for disconnect tone 1 (first set),
you can adjust the high frequency, low
frequency, high level, low level, the On
and Off time for tone 1 and 2.
P.S. If the disconnect tone only has
single frequency, please set it to low
frequency. If the disconnect tone only
has single cadence, please set it to
Tone 1.
Disconnect tone 2 Specify the pattern of the disconnect
tone for disconnect tone 2 (second
set), you can adjust the high
frequency, low frequency, high level,
low level, the On and Off time for tone
1 and 2.
P.S. If the disconnect tone only has
single frequency, please set it to low
frequency. If the disconnect tone only
has single cadence, please set it to
Tone 1.
1. Press the “Apply” button (at the bottom) after you finish to save changes.
2. Press the “Reboot” button to apply the changes.