System information

WellGate 3804 User Manual

S/W version:4fxo.115

Release version,:2.4

6. Upgrade the WellGate 3804

WellGate 3804 supports remote download via TFTP for updating the new rom file.

Regarding new version release, please contact local distributor for more

information.

TFTP/FTP server

It is necessary to prepare the TFTP/FTP server program on the host PC as

TFTP/FTP server. After TFTP/FTP program set up on one PC and connecting

to network, WellGate 3804 is ready to be updated.

Download Procedure

Associated with Chapter 5.12 [rom] command:

-print show versions of all rom files

-app, boot, dsptest, dspcore, dspapp to update main Application program

code, Boot code, DSP testing code,

DSP kernel code, or DSP application

code.

-boot2mboot2m parameter let users to upgrade the whole system flash,

including all the firmware that mentioned above. If 2M rom file

update is executed, users have to set again the MAC address

of WellGate 3804 or it will cause conflict on Ethernet

because the original MAC address is erased during 2M ROM

file upgrading.

Note: To set mac address please key in command setmac:(when key in MAC

address ,press enter each time after key in two characters):

-------------------------------------------------------------------------------------------------

usr/config$ setmac

- enter mac address

- the mac address is 00 01 a8 00 0x xx

- if mac address is correct, please press 'y' to

setup configuration, else press 'n' to continue

-greeting The greeting file can be updated by users. The attributes of

sound file should complied to: -law, 8000 Hz , 8 bit, Mono, 7 kb/μ

-askpin update ASKPIN sound file. This is the greeting sound that when

asking for pincode.

-s to specify TFTP server’s IP address when upgrading ROM files.