System information

WellGate 3804 User Manual
Note:
1. HotLine and LineToLine functions are using the same table.
2.In HotLine service, user have to set No. prepared to dial out; in LineToLine
service ,user have to set port No.
For example, if user set bureau –table 1 192.168.4.69 628 in hotline service,
after user dial in WellGate 3804 port 1, WellGate 3804 will direct dial to
192.168.4.69 and dial 628 to PSTN side, then Phone 628 will ring, user will
hear ring back tone.
If user set bureau –table 1 192.168.4.69 1 in LineToLine service, after user
dial in WellGate 3804 port 1 , WellGate 3804 will direct dial to 192.168.4.69
port 1,user will hear dial tone, then user can dial out No. to PSTN side.
5.21 [prefix] command
This function can do digits replacement of incoming call from IP side or PSTN
side.
------------------------------------------------------------------------------------------------
usr/config$ prefix
Prefix setting information and configuration
Usage:
prefix [-pstnrule index oldnumber newnumber (index = 1 ~ 6)]
[-iprule index oldnumber newnumber (index = 1 ~ 6)]
prefix -print
-print Display prefix information and configuration.
-pstnrule Set PSTN incoming prefix rule information.
-iprule Set IP incoming prefix rule information.
Example:
prefix -pstnrule 1 2 8862 : prefix 2 will be replaced with 8862
Parameter Usages:
-print print current setting in prefix command.
-pstnrule to do digit replacement of incoming call from PSTN side. Ex, to
set prefix –pstnrule 1 123 456which means the first set of
PSTN side rule is: IF user press 123888 after dialing in
WellGate 3804 from PSTN side ,the real number dialed out will
become 456888.
-iprule to do digit replacement of incoming call from IP side. Ex, to set prefix
–iprule 1 456 789which means the first set of IP side rule is: IF
user press 456000 after dialing in WellGate 3804 from PSTN
side ,the real number dialed out will become 789000.
5.22 [rom] command
ROM file information and firmware upgrade function.
------------------------------------------------------------------------------------------------
usr/config$ rom
ROM files updating commands
41