System information

WellGate 3804 User Manual
S/W version:4fxo.115
Release version,:2.4
5.20 [bureau] command
Type bureau to display the command usage.
-------------------------------------------------------------------------------------------------
usr/config$ bureau
Bureau line setting information and configuration
Usage:
bureau [-pstn number] [-hold used] [-table [Port DestIP TELnum]]
bureau -print
-print Display Bureau line informatio and configuration.
-pstn PSTN number (per port basis). This number is used to display
as a caller ID when the caller ID is not available.
The maximum digit length is 32.
-hold Specify the hold tone generation (using PCM file). (On/Off)
Setting value (On=1, Off=0).
-table Set Hot line/Line To Line information. (Port range: 1~2)
Note:
Hotline feature should be used together with:
$sysconf -service 2 (HotLine service)
$sysconf -2nddial 0 (2nddial off)
$h323 -mode 1 (peer-to-peer mode)
Line To Line feature should be used together with:
$sysconf -service 2 (HotLine service/Line To Line )
$sysconf -2nddial 1 (2nddial on)
$h323 -mode 1 (peer-to-peer mode)
Example:
bureau -pstn 2011 2012
bureau -table 1 192.168.4.69 628 2 192.168.4.200 9992
Parameter Usages:
- print: display bureau line information and configuration.
-------------------------------------------------------------------------------------------------
usr/config$ bureau -print
Bureau line setting relate information
PSTN number : 2011 2012 2013 2014 2015 2016
Hold tone generation : On
Hot line / Line to Line table
=================================================
====
Port Destination Address Remote TEL/CHANNEL
--------------------------------------------------------------------------------------------------
1 192.168.4.69 628
2 192.168.4.69 628
=================================================
=====
- pstn: PSTN number (per port basis). This number is used to display as a
caller ID when the caller ID is not available. The maximum digit length
is 32.
- hold: while the terminals support H.450 hold function, the WellGate 3804 will
play the hold tone to PSTN side.
- table: Set Hot line/LineToLine destination IP and e164 numbers information.
(Port range: 1~2)
40