System information

WellGate 3804 User Manual
do know well the application. This might cause incompatibility with other
devices.
2. If user wants to use T.38 fax under fast start mode, please make sure
“h245fs” function is enabled, or fax can’t work normally.
5.19 [group] command
This command is for grouping 4 ports of WellGate 3804. If users need to
register at least 2 numbers (at most 4) separately to gatekeeper, then this
command is needed for such an application.
-------------------------------------------------------------------------------------------------
usr/config$ group
PSTN side grouping information and configuration
Usage:
group -print | -enable | -disable |
-number group_number -pattern pattern_numbers -e164 e164_numbers |
-pattern pattern_numbers -e164 e164_numbers |
-e164 e164_numbers
Comment:
-print : Print current group configuration
-enable : Enable PSTN Grouping
-disable : Disable PSTN Grouping
-number : Set number of divided groups
-pattern : Set number of members in each group
-e164 : Set E.164 number for each group
Example:
group -print
group -enable
group -disable
group -number 2 -pattern 3 3 -e164 01 02
group -pattern 3 1 -e164 100 200
group -e164 11 22
Parameter Usages:
- print : display current grouping information
- enable : enable grouping function
- disable : disable grouping function
- number : set how many groups will be divided
- pattern : set how many members in each group
- e164 : set e164 of each group
For ex: if users need to divide WellGate 3804 into 2 groups (L1 in the 1
st
group, and L2 in the 2
nd
group), and have them register to gatekeeper
separately (e164=100 for 1
st
group; e164=200 for 2
nd
group). They have to use
the following command:
-------------------------------------------------------------------------------------------------
usr/config$ group –pattern 1 3 –e164 100 200
Note: GROUP function is effective only in gatekeeper mode.
39