System information

WellGate 3804 User Manual
[-rtpdelay mode]
[-rtpthruput mode]
[-rtpreliab mode]
tos -print
[-sigtype]|[-rtptype]|[-rtcptype] 0 routine.
1 priority.
2 immediate.
3 flash.
4 flash override.
5 critic.
6 internet control.
7 network control.
[-sigdelay]|[-rtpdelay]|[-rtcpdelay] 0 normal delay.
1 low delay.
[-sigthruput]|[-rtpthruput]|[-rtcpthruput] 0 normal throughput.
1 high throughput.
[-sigreliab]|[-rtpreliab]|[-rtcpreliab] 0 normal reliability.
1 high reliability.
Example:
tos -rtptype 7 -rtpdelay 0 -rtpthruput 0 -rtpreliab 0
Parameter Usages:
-print : display current TOS values configurations.
-sigtype configure TOS type of signaling packets from 0 to 7
-rtptype configure TOS type of RTP packets from 0 to 7
-rtcptypeconfigure TOS type of RTCP packets from 0 to 7
-sigdelayconfigure signaling packets as normal delay or low delay
-rtpdelayconfigure RTP packets as normal delay or low delay
-rtcpdelay configure RTCP packets as normal delay or low delay
-sigthruput configure signaling packets as normal throughput or high
throughput
-rtpthruput configure RTP packets as normal throughput or high
throughput
-rtcpthruput configure RTCP packets as normal throughput or high
throughput
-sigreliab configure signaling packets as normal reliability or high
reliability
-rtpreliab configure RTP packets as normal reliability or high reliability
-rtcpreliab configure RTCP packets as normal reliability or high reliability
Note: Users should be aware that TOS is effective only when network devices
(for ex: router, switch.. etc.) support TOS.
5.17 [tone] command
Tone detection of WellGate 3804 is configurable if the bureau line is
connected to PABX or PSTN. Users can refer to “greetrd” command for tone
recording and analysis. Sometimes the frequencies might shift from standard
level. In such a situation, users have to adjust the tone value manually using
this command.
37