System information

WellGate 3804 User Manual
S/W version:4fxo.115
Release version,:2.4
use this function to analyze disconnect tone of PSTN side.
1. Greeting Voice Record : please follow instructions on screen ; first, call in
line1 of WellGate 3804 from PSTN side(now can’t hear greeting) and press
“enter” to start record .After finishing recording, please press “enter” again
to stop recording. Then choose “y/n” to replay and save or not.
-----------------------------------------------------------------------------------------------
---------------
usr/config$ greetrd
=================================================
=
Welcome to Voice Record/Analysis Mode
--------------------------------------------------
1.Greeting Voice Record.
2.Disconnect Tone Analysis.
3.exit.
--------------------------------------------------
Please input function(1~3): 1
1.Greeting Voice Record.
Please Dial-in "Line 1" and press "Enter" to start record!!!
Press "Enter" to stop record!!!
Starting record...
Stoped record!!!
New Greeting Voice Infomation
---------------------------------------
File size : 0 (K bytes)
Totally time: 8 (seconds)
Do not Hang up the phone!!
Please wait for Writing...block 0
Please wait for Writing...block 1
Please wait for Writing...block 2
Replay New Greeting Voice?(y/n):
2. Disconnect Tone Analysis : please follow instructions on screen ; first call
in line1 of WellGate 3804 from PSTN side(now can’t hear greeting), hang
up the phone and press “enter” to start record disconnect tone. Finally,
choose “y/n” to save data analyzed or not. Notice that system will save one
set of frequency analyzed and 4 set different on/off time in
“busytone1”,”busytone2” ,“reordertone1” , “reordertone2” (Please refer to
tone command) .
If WellGate 3804 still can’t hang up call correctly, it could be tone cadence
issue (on/off time). Please count on/off time and configure it into tone
command.
-----------------------------------------------------------------------------------------------
---------------
usr/config$ greetrd
26