System information

WellGate 3804 User Manual
S/W version:4fxo.115
Release version,:2.4
5. Command lists
5.1 [help] command
Type help or man or ? to list all the available command.
usr/config$ ?
help help/man/? [command]
quit quit/exit/close
debug show debug message
reboot reboot local machine
flash clean configuration from flash rom
commit commit flash rom data
ifaddr internet address manipulation
time show current time
ping test that a remote host is reachable
greetrd Greeting voice and Disconnect tone Record mode
pbook Phonebook information and configuration
sysconf System information manipulation
h323 H.323 information manipulation
voice Voice information manipulation
gk H.323 gatekeeper manipulation
tos IP Packet ToS (Type of Service)values
tone Setup of call progress tones
support Special Voice function support manipulation
group Grouping setting information and configuration
bureau Bureau line information manipulation
prefix Prefix information manipulation
rom ROM file update
passwd Password setting information and configuration
usage: help [command]
5.2 [quit] command
Type quit will quit the WellGate 3804 configuration mode. And turn back to
login prompt.
usr/config$ quit
Disconnecting...
login:
Note: It is recommended that type the “quit” command before you leave the console.
If so, WellGate 3804 will ask password again when next user connects to console
port.
5.3 [debug] command
Open debug message will show up specific information while WellGate 3804
is in operation. After executing the debug command, it should execute
command debug -open as well. One example is demonstrated below.
usr/config$ debug -add h323 vp
usr/config$ debug -open
22