System information

WellGate 3804 User Manual

---------------------------------------------------------------------------------------------------

usr/config$ ifaddr –ip 10.1.1.1 –mask 255.2555.255.0 –gate 10.1.1.254

Note: this is to assign WellGate 3804 an IP address of “10.1.1.1”, subnet mask

“255.255.255.0”, and default IP gateway “10.1.1.254”.

To assign a gatekeeper address for WellGate 3804, and define its own

registered ID and phone number. For detail, please refer to Chapter 4.19 [h323]

command.

Several important H323 parameters is listed below when setting gatekeeper

mode:

“–gk”, ”–e164”, and ”–alias”.

An example is demonstrated below:

---------------------------------------------------------------------------------------------------------

usr/config$ h323 –gk 10.2.2.2 –e164 –alias wg3804_xxx

Note: This is to set gatekeeper IP address as “10.2.2.2”, e.164 number as “1”, and

alias name (h323ID) as “wg3804_xxx”.

(d) Save WellGate 3804 Configuration & Reboot WellGate 3804

1. Confirming the values, type commit and press enter to save all the

changes you have done.

2. Type reboot and press enter to reboot the WellGate 3804.

3. Wait for WellGate 3804 initializing in gatekeeper mode.