System information

WellGate 3804 User Manual
S/W version:4fxo.115
Release version,:2.4
It is important for the first time user to follow the operation procedure.
1. Power on the WellGate 3804 and the sentence “Please wait while system is
initializing…………S” is displayed.
---------------------------------------------------------------------------------------------
Attached TCP/IP interface to cpm unit 0
Attaching interface lo0...done
Please wait while system is initializing .......... S
2. Wait around 40 seconds, the login name and password are requested.
---------------------------------------------------------------------------------------------
Attached TCP/IP interface to cpm unit 0
Attaching interface lo0...done
AC4804[0] is OK
AC4804[1] is OK
AC4804[2] is OK
Successful
Initialize OSS libraries...OK!
open stack successful
cmInitialize succeed!
GK mode selected.
login:
3. Login: when WellGate 3804 is used for the first time, “root” is default login
name without a password.
4. Password setting: type “passwd –set root ****” to define a password for
“root” account. “****”, in above description, stands for contents of the
password. An example, to set root’s password as good, is demonstrated
as following:
---------------------------------------------------------------------------------------------
usr/config$ passwd -set root good
Setting
login: root
Password: good
OK
(b) Configure WellGate 3804 IP Address
Use “ifaddr” command to set up WellGate 3804’s IP address and related
network information. An example is demonstrated below:
14