User manual

26xx Technical Manual EN-V108

3.3.10 Syslog Setting

This syslog is used to send the debug log from Wellgate 26xx to syslog server.

Syslog mode Select the Syslog mode for Enable or

Disable. If you Enable this feature,

please specify the Syslog Server

address and port number at the Syslog

server address and port’s text box,

then you can get detail system log

from Syslog server.

Syslog Server address If you Enable the Syslog mode, please

specify the IP address of Syslog Sever

for data storage.

Syslog Server port Specify the Syslog Server port number,

The default port number is 514.

1. Press the “Apply” button (at the bottom) after you finish to save changes.

2. Press the “Reboot” button to apply the changes.