User manual

26xx Technical Manual EN-V108
26
Display name Specify the Display name of the phone
number
Forward Specify the Representative forwarding
type to be used, only choose busy
Forward Number Specify the number to be forwarded
when the specified forward condition is
met.
Ring Type Select the Ring Type of representative
number. You can choose the following:
 Serial ring (Follow the ring priority
defined below)
 Simultaneous(ring all)
Ring Time (s) for Serial ring Specify the Ring Time for Serial ring
Status Displays the registration status,
whether it is registered or not.
Port Hunting Select the group of sip trunk number,
and specify the priority.
Only the checked line will become the
member of the sip trunk number.
The default setting L1~L2 is grouped.
1. Enter the IP address and port number of the SIP proxy into the Primary proxy
address and Port fields. Press the “Apply” button to save changes.
2. Press the “Reboot” button to apply the changes.