Installation Guide

For customer support,please call WELLFOR ([phone] or Email us at [e-mail]
PAGE 7
1.After the pipe connection is completed, open the protective panel and cover,
and then open the cartridge,flush the pipe; then close the cartridae to check
the pressure resistance and sealing performance of the pipeline, make sure
there are no leakage.
2.Block each outlet pipe with a stopper then open the cartridge to check if the
pipe joint is well sealed and the pipe condition under pressure to ensure no
leakage.
Testing Purpose:Flush the impurities and sludge in the pipe to avoid
clogging and affect the effluent functions.