® PACKAGE CONTENT PACKAGE CONTENT PACKAGE CONTENT PART# DESCRIPTION QTY PART# DESCRIPTION QTY A Bottom Gasket 1 F Magnetic strip 1 Magnetic Seal B Door panel 1 G Aluminum channel C Wall Jamb 1 H U channel 1 D Top Cover Cap 1 Alu. Threshold 1 E Handle 1 Wall anchor @6x38mm ST4*30 7 pcs 7 pcs AN 1 piece for each as spare part.
® ® Level TOOLS REQUIRED Model A (width) C (Opening) 30" 30" ~31 3/8" 25 19/32" Drill Bits Screw Driver Drill Level Mallet Pencil 3/8" 27 19/32 13/32" 29 19/32" stm 3/8" 31 5/8" Silicone) (Measuring Tape Knife Sealant MASONRY DRILL Goggles Pom —— 7 q BIT @6 EN om JEG: adjustment" | | adjustment Glove Right angle Ruler | ( Masking or painter's Wood Pa tape : 7 SAFETY INFORMATION Wall Jamb Installation CAUTION Please carefully read the following important safety information before handling or installing this
Door panel Installation Magnetic strip Install to door panel 3» wall adjustment Keep flush ® ® handle Installation Fasten the door panel (1 1) Sn FER
® Determine the G & H position ® U channel Installation Magnetic Seal Wall Jamb Installation \ J Make sure the magnetic seals close properly! Top Cover Cap & Bottom Gasket Installation
® 4 2 Alu. Threshold Installation Measure "X" and cut the alu threshold same length as "X". 27mm [1 1/16" SEALING Ensure that the Shower door closes tightly and opens smoothly. Apply a good quality silicone sealant along the wall Water seal (I) . Allow 24 hours for silicone to dry before use. 24 hour Apply Silicone supplied).