User manual

3.2 Control Panel Overview
Power: press the button for a few seconds to turn on and press the button for two seconds.
To turn off the power.
Power LED: the LED light turns green when the power turns on. The LED light is off
when the power is off.
Volume Up: Press to increase the volume (Volume level increases from 0 to 20).
Volume Down: Press to decrease the volume.
Left: Press to scroll left.
Right: Press to scroll right.
Up: Press to scroll up.
Down: Press to scroll down.
Menu/Enter: Press to display the menu in the Photo or Audio mode, or to confirm the
selection.
Mode: Press to switch the device between the photo-display mode and the audio-play
mode.
Compact Flash Card Slot: Insert your Compact Flash (CF) type I or II memory card here.
SD/MMC/MS 3-in-1 Card Slot: Insert your Secure Digital (SD), Multimedia Card (MMC), or
Memory Stick (MS)/ Memory Stick PRO memory card here.
Audio Out: Plug your headphones or external speakers into this standard audio output port.
USB Device: Plug the USB cable (included) with mini type-B connector end to this port for
connecting to your PC if the DPF1040 is used as a memory card reader/writer.
USB Host: Plug in your USB device. USD devices could be USB flash drives, digital cameras,
memory card reader/writers, and mp3 players such as iPod, etc …
Note: 1. Some types and brands of USB devices, USB flash drives, digital cameras, memory card
readers/writers, and MP3 players may not be compatible with the DPF1040.
2. The DPF1040 is not compatible with any USB hard drives since the supplied power is
not sufficient for the USB hard drive use.
8