User manual

Adjust the LCD Backlight Brightness
1
1
1
.
.
.
Press Up or Down button to scroll to and highlight Display in the Setup sub-menu.
2
2
2
.
.
.
Press Right button to move and highlight Backlight on the lower tier of sub-menu. A
status bar and number (from 0 to 10) shows the current brightness of the LCD backlight.
3
3
3
.
.
.
Press Right button again to move to the current number.
4
4
4
.
.
.
Press Up or Down button to set the number related to LCD backlight brightness.
• Number 0: Darkest.
• Number 10: Brightest.
5
5
5
.
.
.
You can leave the setup mode by press Menu/Enter button. To perform other setup
procedures, press Left button several times until the highlight is on the setup sub-menu.
Set the Default
1
1
1
.
.
.
Press Up or Down button to scroll to the Default in the Setup sub-menu.
2
2
2
.
.
.
Press Menu/Enter button to set the device setting to manufacture default.
Firmware Upgrade
1
1
1
.
.
.
Download the latest version of the latest source file (The DPF1040.bin) from our estore
website and store it into your USB flash drive. You can confirm the file size by checking
the file size match between the source file and the downloaded file.
2
2
2
.
.
.
Connect your USB Flash drive to the Device USB Host Slot.
3
3
3
.
.
.
Scroll to Setup in the Main Photo Menu. You can see a sub-menu with Date, Time, Clock,
Sleep, Wake up, LCD Saver, Display, Default, and Firmware in the bottom option.
4
4
4
.
.
.
Press Right button and Down button to scroll and highlight Firmware of the submenu.
5
5
5
.
.
.
Press Menu/Enter button. Fimware upgrade information and a message of choice of
“Yes” and “No” will be shown on the screen.
6
6
6
.
.
.
The default of Firmware upgrade is “No”. You can use the Left button to select “Yes”
and press the Menu/Enter button.
7
7
7
.
.
.
If you select “Yes”, a warning message will be shown on the screen to confirm the
upgrading action. If you intend to continue, you can use the Left button to select “Yes”
again and press the Menu/Enter button to start the firmware upgrade.
8
8
8
.
.
.
After the update is completed, the message “Firmware Upgrade…Percentage = 100” will
display, and the system will restart automatically.
After you complete the upgrade process, you are able to utilize the full new features of this
device.
Warning:
1. Never unplug your USB Flash Drive whenever you are in a process of upgrading the
firmware. Mistakenly unplugging causes permanent damage to the system.
2. It is highly advised to consult our customer support before you go ahead and upgrade
the firmware.
Note: For more product information and customer support, please visit our website at
http://estore.wellex.com/
21