User manual

2
2
2
.
.
.
If you would like to use external speakers or headphones, you have to plug the audio
cable of those devices into the Audio Out of the DPF1040.
Select Audio Mode
1
1
1
.
.
.
Press Mode button to switch current mode from Photo mode to Audio mode if you are in
the Photo mode. You will see a message “Audio” shown on the bottom-right corner of
the LCD screen. An Audio Information block, as shown in Figure 7, will appear if any
MP3 file is available; otherwise a message “No Audio files available” appears to indicate
that no available MP3 files were found in the inserted memory cards, USB device, or the
internal flash memory.
Note: You can still continue to play photo even though you switch to the Audio Mode.
Display Main Audio Menu
1
1
1
.
.
.
Press Menu/Enter button. The Main Audio Menu is shown on the left side of the screen.
This menu includes:
• Play/Pause
• Stop
• Select
• Play Mode
• Equalizer
• Save
• Setup
• Exit
2
2
2
.
.
.
The default shows the Play/Pause is highlighted.
3
3
3
.
.
.
Press Up or Down button to scroll up or down.
Play MP3 Music
1
1
1
.
.
.
Scroll to Play/Pause in the Main Audio Menu. Press Menu/Enter button, the DPF1040
will play the music with information shown in the Audio Information block, as shown in
Figure 7, according to your or default setting (please refer to the sections of Set Play
Mode and Set Equalizer).
2
2
2
.
.
.
You can select the next or the previous music (song) in the playlist you would like to play
by pressing Up or Down button. You will see the Play Order is changed in the audio
information block.
Note: The default playlist includes all music available in the inserted memory cards, USB
device, and the internal flash memory. You can also create a playlist of the selected
music to place and play your favorite songs (please refer to the section Select MP3
Music by Song Title to create a playlist of the selected music (songs).
Adjust Volume
16