Datasheet

44
EN
Message/symptom Possible cause Remedial measures
Display: „- - -
 Tool has not been detected
 Tool defective
 Check connection of tool to
device
 Check connected tool
No display function (display
OFF)
 No mains supply voltage  Turn on mains power switch
 Check mains supply voltage
 Check device fuse
No vacuum at desoldering tool
 Vacuum not connected
 Desoldering nozzle clogged
 Pump faulty
 Connect vacuum hose to
vacuum connection
 Service desoldering nozzle
using cleaning tool
Insufcient vacuum at desolde-
ring tool
 Filter cartridge on desoldering
tool full
 Main lter full
 Change lter cartridge on
desoldering tool full
 Change the main lter element
on the soldering station
Hot air tool has no air
 Air hose not connected
 Main lter full
 Connect or check air hose
 Change main lter cartridge on
soldering station
Symbols
Caution!
Read the operating instructions!
Before performing work of any kind
on the unit, always disconnect the
power plug from the socket.
ESD-compatible design and ESD-
compatible workstation
Equipotential bonding
CE mark of conformity
Fuse
Safety transformer
Soldering
Desoldering
Hot air
Disposal
Do not dispose of electric tools together
with household waste material! In
observance of European Directive
2012/19/EU on waste electrical and
electronic equipment and its implemen-
tation in accordance with national law,
electric tools that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
Dispose of replaced equipment parts,
lters or old devices in accordance with
the rules and regulations applicable in
your country.
Error messages and error clearance