Datasheet

40
EN
Parameter menu
Perform. Mode Menu access Tool parameters
The function determines the heating characteris-
tics of the soldering tool to achieve the set tool
temperature.
Option Description
standard adapted (medium) heating (factory
setting)
min. slow heating
max. rapid heating
Button lock WXHAP Menu access Tool parameters
This function can be used to adjust the factory
button presets of the WXAHP tool.
Option Description
OFF –
ON The WXHAP is switched on the rst
time the button is pressed and switched
off the next time the button is pressed.
Process window Menu access Tool parameters
The temperature range set in the process window
determines the signal response of the oating
switching output.
Notice
On tools with an LED ring light (e.g. WXDP 120),
the process window denes the illumination
characteristics of the LED ring light.
If the LED is continuously illuminated, this means
that the preselected temperature has been
reached or that the temperature is within the
predetermined process window.
A ashing LED indicates that the system is
heated or that the temperature is outside the
process window.
Language Menu access Station parameters
CHN
中文
DEN Dansk
ENG English
ESP Español
FIN Suomi
FRA Français
GER Deutsch
HUN Magyar
ITA Italiano
POR Português
RUS Pусский
SWE Svenska
TUR Türkçe
JPN
日本語
POL Polski
KOR
한국말
CZE Český
Temperature version °C/°F (temperature units) Menu access Station parameters
Option Description
° C Celsius
° F Fahrenheit