Brochure

6 | Weller WX stations weller-tools.com | 7
THIS DESOLDERING SYSTEM IS IN A LEAGUE OF ITS OWN!
With a heating time of 35 seconds, the WXDP120 and WXDV120 desoldering irons set a new standard for high-performance
desoldering. Thanks to the dual channel soldering station and WXD2 desoldering station, coupled with the high-power pencil
(WXPD120) or inline (WXDV120) desoldering irons, you can tackle jobs you never knew were possible.
WXD2 DESOLDERING
STATION
Remove solder with the fastest
desoldering irons in the world.
Desoldering
WXDP120 Desoldering iron
WXDV120 Desoldering iron
WXD2 Desoldering station
Compatibility
User-friendly handle design
The co-molded handle with integrated switch allows for fast and
efcient operation. The solder collector helps to prevent the tool from
twisting in the hand during use.
Less cleaning required
The XDSL tiplet design creates less need for cleaning and more time
on the job. The once tedious and time-consuming task of cleaning
the tiplet is less of a requirement than for tools of the past.
Quicker cleaning
Thanks to the bayonet lock design, the spring-loaded collection
chamber can be easily and quickly cleaned, saving on operator
downtime and improved productivity.
High performance desoldering
With 120 watts of power and 35 second heat up time, the
WXDV120 and the WXDP120 desoldering tools can easily handle
tasks that were difcutl in the past. High mass and large ground
plane PC boards are no match for the new 120 watt tools.
Increased cost savings
Increased power (120w) and lower operating temperatures
combined with the programmable standby feature can add extended
life to the XDSL series tiplets.
Fast-action Venturi system
The fast-action Venturi system produces a controlled vacuum
via an external compressed air source. A ltered (clean/dry)
compressed air supply of 58–87 PSI / 4–6 bar is required.
Vacuum Off delay time
The programmable Vacuum Off delay time can assist in helping to
prevent unnecessary tiplet clogging. The Vacuum On delay feature
allows the solder to reow before the vacuum initiates.
ADVANTAGES AT A GLANCE
Peripheral heating
accessories
WHP1000 Preheat plate
WHP3000 Preheat plate
Peripheral fume
extraction accessories
Zero-Smog
®
4V Fume extractor
Zero-Smog
®
6V Fume extractor
Soldering and related accessories
WXP65 Soldering iron
WXP120 Soldering iron
WXP200 Soldering iron
WXMP-MS Micro soldering iron
WXMT-MS Micro desoldering tweezers
WXHP120 Pre-heating plate
WXSB200 Solder bath
WXDP120
WXDV120