Brochure

2 | Weller WX stations weller-tools.com | 3
Robotics connectivity
An RS-232 serial protocol connection is available on the
WX platform stations for use with robotic soldering systems.
Intelligent tool detection
All connected tools and accessories are detected
automatically by the stations and their name(s) shown
on the display.
Very short learning curve
Multilingual menus are available in 18 languages
including: English, Spanish, French, German, Italian and
Mandarin Chinese. Selection is easy with the intuitive
menu selection.
Multifunctional USB port
Firmware updates and parameter settings are quick and
easy using USB sticks. User-friendly PC interface.
ESD safe
All WX devices are ESD-safe.
Traceability
All WX stations are traceable and can be integrated into
an existing traceability process.
Integrated memory
Parameters such as standby temperatures and automatic
off time can easily be stored in the soldering iron.
Parameters only need to be stored once; the soldering iron
can then use them with any WX station.
Use as benchtop controller
Integrated USB ports allow WX stations to be connected
to and to control soldering fume extractors, pre-heat plates
and programmable logic controllers (PLC). The connected
tools feed back their parameters and status to the display.
Safe soldering
Weller WX stations make the manual soldering process safer,
a crucial factor in the automotive, aerospace and medical
industries. This is provided by temperature and tool locking,
and tool-specic temperature settings.
TRACEABILITY
QUALITY
ISO
IPC
MIL
Table of Contents
WX Team of products 2 – 3
WX Soldering stations 4 – 5
WXD Desoldering stations 6– 7
WXA Hot air stations 8 – 9
WXR Rework station 10 – 11
WX Tool selection and compatibility matrix 12 – 13
WXR
| WXD | WXA | WX Sets 14 – 15
WXMP-MS Micro soldering iron
| RT | RT-MS Tips 16 – 17
WXMT-MS Micro desoldering tweezers
| RTW | RTW-MS Tips 18
WXP65 Soldering iron
| XNT Tips 19 – 20
WXP120 Soldering iron
| XT Tips 21 – 22
WXP200 Soldering iron
| XHT Tips 23
WXDP
120 | WXDV120 Desoldering irons 24
XDSL Desoldering tiplets 25
WXHAP200 Hot air pencil
| Hot air nozzles (type F) + (type R) 26
Hot air nozzles (type D) + (type Q) 27
Zero-Smog
®
4V | Zero-Smog® 6V Fume extractors 28
WHP1000 | WHP3000 Pre-heat plates 28
WXHP120 Pre-heat plate 29
WXSB200 Solder bath 29
WX Adapter
| WX Accessories 29
Technical data 30 – 31
WXTEAM
OUR
Five pros – any challenge.
WX 1
WX 2
WXD 2
WXA 2
WXR 3
OUR WX TEAM
The Weller WX team of products is here to solve all of your problems – from issues with soldering and
desoldering to the use of hot air in your manufacturing process. The WX team offers full WX tool
compatibility, tried-and-tested bench top functions and all essential traceability features.