WX TEAM One platform – up to every challenge
WXTEAM OUR Five pros – any challenge. ISO MIL IPC TRACEABILITY QUALITY Safe soldering Weller WX stations make the manual soldering process safer, a crucial factor in the automotive, aerospace and medical industries.This is provided by temperature and tool locking, and tool-specific temperature settings. Use as benchtop controller Integrated USB ports allow WX stations to be connected to and to control soldering fume extractors, pre-heat plates and programmable logic controllers (PLC).
WX SOLDERING STATIONS A new era of soldering. WX 2 WX Soldering station Compatibility ADVANTAGES AT A GLANCE Visual process control through LED signal function Blue LED ring light on most models (light on = heater on, light off = heater off) TWO STATIONS – MANY ADVANTAGES The powerful, dependable and user-friendly WX1 and WX2 stations redefine the world of soldering. Maximum process reliability for manual soldering tasks is provided for the automotive, aerospace and medical technology industries.
WXD2 DESOLDERING STATION Remove solder with the fastest desoldering irons in the world. WXD2 Desoldering station Compatibility ADVANTAGES AT A GLANCE Fast-action Venturi system The fast-action Venturi system produces a controlled vacuum via an external compressed air source. A filtered (clean/dry) compressed air supply of 58–87 PSI / 4–6 bar is required.
WX A2 HOT AIR STATION The perfect solution for hot air rework and soldering applications. WXA2 Hot air station Maximum flexibility ADVANTAGES AT A GLANCE Adjustable airflow control A clean, dry (oil and moisture-free) compressed air supply of 4–6 bar/58–87 PSI is required to operate the WXA series hot air station. The volume of airflow is measured in LPM and is displayed as a percentage of the maximum airflow (0–20 1/m). Flexible operating features The WXA2 has 3 separate operating modes.
WXR3 REWORK STATION Everything – and more. ADVANTAGES AT A GLANCE 600 Watt WXR3 Rework station Compatibility Power and class The WXR3 is a state-of-the-art 3 channel rework system with 600 watts of total power. The WXR3 can be used for all applications using the compliment of WX series soldering irons, desoldering irons and hot air pencil. Totally self-contained 2 internal pumps provide the sources for hot air, desoldering vacuum and a vacuum pick up tool for a completely self-contained rework system.
WX TOOL SELECTION AND COMPATIBILITY MATRIX 200 W (255 W) 200 W (255 W) 200 W (255 W) 200 W (255 W) 420 W (600 W) WX1 Soldering power unit with 1 channel WX2 Soldering power unit with 2 channels WXD2 Desoldering power unit with 2 channels WXA2 Hot air power unit with 2 channels WXR3 Rework power unit with 3 channels WXP65 | 65W SOLDERING IRON Small, fast soldering iron with 65 watts. Qualified for fine solder jobs with high heating demand. Power response heating element technology.
Overview WX Sets WXR Rework stations WXA Hot air station WXR3001 Set WXR3 power unit with WXHAP200 hot air pencil (200w / 24v), WXDP120 desoldering iron (120w / 24v), WXP65 soldering iron (65w / 24v), WVP vacuum pick-up, PDN pliers, WDH30, WDH70, WDH10 safety rests WXR3002 Set WXR3 power unit with WXHAP200 hot air pencil (200w / 24 v), WXDP120 desoldering iron (120w / 24 v), WXP120 soldering iron (120w / 24v), WVP vacuum pick-up, PDN pliers, WDH30, WDH70, WDH10 safety rests WXR3003 Set WXR3 power unit wi
Weller offers the best tools for every soldering challenge. n Fast and easy tip change n Exceptionally short heat up time n Energy saving with standby function n Excellent response time Maximum flexibility and productivity. No soldering tip calibration required. Conical a Type Øa mm Order no. Type Øa mm Order no. RT 1 0.2 T0054460199 RT 1MS 0.2 T0054461499 RT 1 NW* 0.1 T0054462599 RT 1NWMS* 0.1 T0054462571 RT 2 0.8 T0054460299 RT 2MS 0.8 T0054461799 RT 12MS 25° 0.
n Fast and easy tip change n Exceptionally short heat up time n Energy saving with standby function n Excellent response time WXP65 soldering iron set with XNTA tip and WDH10 safety rest WXMT-MS micro desoldering tweezers set with tweezers tips RTW2-MS and WDH60 safety rest Small fast soldering iron. Suitable for fine soldering jobs with a high heat demand. 65w | 24v | Max. temperature 450°C / 850°F | Order no. T0052921299 Slim tweezers. Ideal for soldering and desoldering very small SMD components.
Gull wing Typ b c a XNT b mm c mm Order no. XNT GW 1 2.0 33.0 T0054485499 XNT GW 2 1.5 27.5 T0054488099 n Low price interchangeable soldering tips n Maximum heat transfer n Improved heater sensor positioning n Short recovery time WXP120 soldering iron set with XTB tip and WDH10 safety rest Round c Type Øa mm c mm Order no. Type Øa mm c mm Order no. XNT 1S 0.2 28.5 T0054485299 XNT 1X 0.4 28.0 T0054486599 a XNT 1LX 0.2 T0054487299 XNT 1SLX 45° 0.4 39.
Gull wing b c c Order no. mm Type Øa mm b mm c Order no. mm XT GW1 2.3 3.2 36.5 T0054471299 XT GW3 0.8 0.9 41.5 T0054473999 XT GW2 3.5 4.8 36.5 T0054473599 Type Øa mm c mm Order no. XT KN 60 ° 2.0 45.
XDSL series desoldering tiplets n Intelligent, programmable desoldering iron n 35 sec.
n Extensive range of nozzles to meet every application need n Powerful 200 Watts design for comfortable and precise operation n Ideal for working on surface mounted components and suitable for EPA areas. Hot air nozzle WXHAP 200 2 sides heated (type D, length X = heated side) Hot-air iron for soldering SMD devices. The integrated ion trap allows an ionic free air flow. 200 W | 24 V | Max. temperature 550°C / 999°F | Order no. T0052712099 Type Flat F02 Flat nozzle 8.0 1.
WX peripheral fume extraction units WX compatible heating plate Zero-Smog® 4V Mobile fume extraction unit for large areas, with built-in turbine and pressure regulator for constant volume flow. Up to 4 work places. WXHP120 Order no. T0053660299 Preheating plate 120 W | 24 V Heated surface area: 80 x 50 mm Order no. T0052702999 Zero-Smog® 6V Mobile fume extraction for large areas, with a built-in turbine. Up to 6 work places. Order no.
WXD 2 WX 1 Technical data WXA 2 WX 2 WXR 3 Features common to all: ■■ Material touch panels are made of antistatic glass ■■Mains supply 120 VAC / 60Hz ■■USB interface and RS 232 interface ■■Temperature stability ± 2°C (± 4°F) WX1 WX2 WXD2 WXA2 WXR3 Power consumption 200w (255w) 420w (600w) Temperature range (adjustable*) WX1 WX2 WXD2 170 x 151 x 130 mm (LxWxH) (6.69 x 5.94 x 5.12 inch) 3.2 kg Order No. WX1 170 x 151 x 130 mm (LxWxH) (6.69 x 5.94 x 5.12 inch) 3.2 kg Order No.
Visit us at weller-tools.com © 2015 Apex Tool Group, LLC | 1000 Lufkin Road, Apex, NC 27539 | weller-na@weller-tools.com ATG-1908 | ITEM No. T550938 | 7.5m 3/15 RRD | Specifications subject to change without notice.
