Datasheet

16
Weller flexibility
Refer to the matrix on page 17 to make your choice of connecting tools for the stations.
The WST 20, 50 W/24 V, copes with all known thermo-elastic
plastics. Adjustable for a stripping length up to 30 mm. Additional
blades avail-able for stripping flat cables and shrinking.
The WST 82 is the 80 W version of the WST 20. Adjustable for a
stripping length up to 30 mm. Additional blades available for
stripping flat cables and shrinking.
WST 20 Thermal wire stripper with Safety rest
WST 82 Thermal wire stripper with Safety rest
WST 20
005 25 030 99
WST 82
005 25 031 99
WHP 80 (80 W/24 V) Preheating plate
WHP 80
005 27 028 99
With a heating surface of 80 x 50 mm, they preheat IC boards
prior to micro rework.
WSB 80 Solder bath
WSB 150 Solder bath
The WSB 80 is a very useful rework preparation tool. The solder
bath is temperature controlled continuously from 50˚C to 450˚C
via an existing 80 W power source. The solder bath can be used
to tin wire ends and clean leads of all extraneous solder particles
in preparation for reworking. (Usable for lead free solder.)
WSB 150
005 27 042 99
WSB 80
005 27 040 99
The WSB 150 solder bath is optimally suited to tin coating and
preparation of soldering components. It has a temperature range
of 50°C – 550°C with heat output of 150 W. To guard against
dripping solder residue, the solder bath is placed in a V2A tray,
supplied as an optional extra. (Usable for lead free solder.)