Datasheet
15
The 65 W micro pencil is up to the task with superior perform-
ance for both heat-up and thermal efficiency. Suitable to handle
all micro components and fine pitch tasks. The WMP provides an
extremely short tip-to-grip distance. The heater is integrated into
the handle. When the tip wears out the heating element goes on.
WMP set consists of WMP micro soldering pencil and WDH 20
Safety rest.
WMP Micro soldering pencil set
WMRP Soldering pencil set
The RT soldering tips have an extremely short heat-up time.
All component parts of the system, such as the sensor and
heating element, are designed for optimum heat transfer. This
ensures absolute efficiency in the utilization of the power
provided by the supply unit. The recovery time is minimized.
Changing soldering tips is quick, easy, and, most importantly,
requires no tools. WMRP set, consisting of WMRP soldering
pencil, RT 3 soldering tip and WDH 50 Safety rest.
WMP
005 29 179 99
consists of:
WMP WMP Micro Soldering Iron 65 W,
24 V with soldering tip NT 1
005 15 122 99 WDH 20 Comfort safety rest
WMRP
005 29 190 99
consists of:
005 29 171 99 WMRP Soldering pencil for RT
soldering tips
005 15 156 99 WDH 50 Safety rest with Stop+Go
Function for soldering
iron WMRP
005 44 603 99 RT 3 RT 3 soldering tip 40 W
The tweezers are used to desolder SMD components.
The tweezers have two moveable heating elements. WTA 50
set, consisting of WTA 50 Tweezers, AK 51 Safety rest for
Tweezers.
WTA 50 Tweezers set
WMRT Tweezers set
WMRT
005 13 173 99
WTA 50
005 33 133 99
consists of:
005 13 174 99 WMRT Desoldering tweezers
005 15 146 99 WMRTH Safety rest with Stop+Go
function
The new WMRT desoldering tweezers, 80W/24V, feature twin paral-
lel adjustable tiplets which allows the soldering and desoldering
of very small SMD components. The The new Weller control units
automatically recognise the type of soldering tool when it is con-
nected and assigns the appropriate control parameter for that
tool. This normally removes the need for recalibration.WD 1M and
WD 2M control units, with their high speed regulation capability,
are able to drive these tweezers. When placed in the WMRTH Stop
& Go safety stand the tweezers are automatically switched off
which increases their lifetime.
consists of:
005 13 171 99 WTA 50 Desoldering tweezers
005 15 042 99 AK 51 Safety rest