Datasheet

13
The new WMRT desoldering tweezers, 80W/
24V, feature twin parallel adjustable tiplets
which allows the soldering and desoldering of
very small SMD components. The The new
Weller control units automatically recognise
the type of soldering tool when it is connected
and assigns the appropriate control parameter
for that tool. This normally removes the need
for recalibration.WD 1M and WD 2M control
units, with their high speed regulation capabili-
ty, are able to drive these tweezers. When
placed in the WMRTH Stop & Go safety stand
the tweezers are automatically switched off
which increases their lifetime.
WMRT Micro Desoldering
Tweezers for WD 1M, WD 2M
005 13 173 99 WMRT
consists of:
005 13 174 99 WMRT micro tweezers without Tip set
005 44 652 99 RTW 2 Tip set
005 15 146 99 WMRTH Stop+Go safety rest for WMRT
Scope of supply WMRT
Order No. 005 13 174 99
WMRT Micro Desoldering
Tweezers without RTW 2 Tip
RTW 2 tip for the Micro
Desoldering Tweezers
Order No. 005 44 652 99
RTW 2 tip for the Micro
Desoldering Tweezers
Order No. 005 15 146 99
WMRTH safety rest
with Stop+Go function
Type Description Width A Thickness B Order No.
RTW 1 Tip set, 45° Ø 0,4 mm 005 44 651 99
RTW 2 Tip set, 45°, chisel shape 0,7 mm 0,4 mm 005 44 652 99
RTW 3 Tip set, 45°, chisel shape 3 mm 1,0 mm 005 44 653 99
RTW 4 Tip set, 45°, chisel shape 6 mm 1,0 mm 005 44 654 99
RTW 1MIL* Tip set, 45° 0,04 mm 005 44 655 99
* For applications according to MIL-STD-2000, on request.
Plug-in adjusted Soldering Tip Set
for WMRT Stop+Go stand