Datasheet

12
RT soldering tips for WMRP soldering pencil
connectable to WD 1M and WD 2M
Type Description Width A Thickness B Order No.
RT 1 Needle tip – – 005 44 601 99
RT 1SC Micro chisel 0,4 mm 0,15 mm 005 44 612 99
RT 2 Point tip Ø 0,8 mm – 005 44 602 99
RT 3 Chisel shape, straight 1,3 mm 0,4 mm 005 44 603 99
RT 4 Chisel shape, straight 1,5 mm 0,4 mm 005 44 604 99
RT 5 Chisel shape, bent, 30° 0,8 mm 0,4 mm 005 44 605 99
RT 6 Round shape, beveled, 45° Ø 1,2 mm – 005 44 606 99
RT 7 Knife tip, 45° 2,2 mm – 005 44 607 99
RT 8 Chisel shape 2,2 mm 0,4 mm 005 44 608 99
RT 9 Chisel shape Ø 0,8 mm 0,4 mm 005 44 609 99
RT 10GW Gull wing 1,2 mm 2,0 mm 005 44 610 99
RT 11 Chisel shape 3,6 mm 0,9 mm 005 44 611 99
RT Measuring tip 005 44 613 99
RT 1MIL* Needle tip 005 44 614 99
RT 1SCMIL* Chisel tip 0,4 mm 0,15mm 005 44 615 99
RT 3MIL* Chisel tip 1,3 mm 0,4 mm 005 44 616 99
* For applications according to MIL-STD-2000, on request.
The soldering tips of the RT-series are
suitable for microrepair tasks under micro-
scopes or soldering works with lead free
solder, where a fast heat transfer is re-
quired. Changing soldering tips is quick,
easy and most importantly, requires no
tools. Just pull out the old one, push in the
new one and continue soldering. Thanks
to its short heat-up time, the soldering
pencil is ready to use again right away!
The RT soldering tips have an extremely
short heat-up time (2 – 6 Sec). All compo-
nent parts of the system, such as the
sensor and heating element, are designed
for optimum heat transfer. This ensures
absolute efficiency in the utilization of the
power provided by the supply unit. The
recovery time is minimized. Changing
soldering tips is quick, easy, and most
importantly, requires no tools.
Order No. RT 3:
005 44 603 99
RT 3 soldering tip
Order No. WMRP:
005 29 171 99
soldering pencil
without tip
Order No. WDH 50:
005 15 156 99
safety rest with Stop+Go
function