Performance by Design New Dimension in Hand Soldering
Content Microprocessor-controlled soldering Page Micro soldering pencil Page Lead free soldering with Weller tools 3 WMRP soldering pencil for RT soldering tips 12 WD 1 / WD 1000 / WD 2 4 RT series soldering tips 12 Technical data WD 1 6 Scope of supply WD 1 6 6 WMRT Micro Desoldering Tweezers for WD 1M, WD 2M 13 Scope of supply WD 1000 / WD 1000T Accessories WD 1 / WD 1000 / WD 1000T 6 Scope of supply WMRT 13 Technical data WD 2 Dual output soldering station 7 Plug-in adjusted Sold
Lead Free Soldering with Weller Tools Why Lead Free Soldering? In support of the global drive to reduce enviromental pollution the European Community's RoHS legislation came into force on July, 1st 2006. A key element of this legislation is the requirement to remove lead from the soldering process. Why Weller? Weller has extensive experience and knowledge of lead free solder.
Microprocessor-controlled Soldering WD 1 / WD 1000 / WD 1000T / WD 2 The microprocessor-controlled control units and soldering stations WD 1/WD 1000 / WD 1000T / WD 2 are part of a generation of devices which were developed for industrial production and technology, including repair and laboratory areas. The WD 2 microprocessor-controlled control unit has dual ports. These new Weller stations are characterised by their modern, ergonomic design.
Automatic tool recognition Heating-up time °C 350° 300° 250° 200° WP 80 14 sec. Regular Iron 45–55 sec. 150° 100° 50° 5 10 15 20 25 30 35 40 45 50 55 SEC. The new Weller control units automatically recognise the type of soldering tool connected and assigns the appropriate control parameter for that tool. This normally removes the need for recalibration. Additional function of WD 2 The WD 2 has the ability to control two 80 W soldering irons at the same time or one soldering iron of 150 W.
Control unit WD 1 Technical data WD 1 Dimensions: 134 x 108 x 147 mm (l x w x h) Mains voltage: 230 V / 50/60 Hz; 120 V / 50/60 Hz Power input: max.
Dual output control unit WD 2 Technical data WD 2 Dual output soldering station Dimensions: 134 x 108 x 147 mm (l x w x h) Mains voltage: 230 V / 50/60 Hz; 120 V / 50/60 Hz Power input: 160 W Protection class: I Temperature control: 150°F – 850°F (50°C – 450°C) WSP 150 up to 950°F (550°C) Temperature accuracy: ±17°F (± 9°C) Temperature stability: ±9°F (± 5°C) Leak resistance of soldering tip: < 2 Ω (Tip to ground) Scope of supply WD 2 005 34 046 99 WD 2 Dual output control unit 160 W, 230 V
Multifunction soldering stations WD 1M and WD 2M with High Speed Regulation for Micro soldering tools The Weller WD 1M and WD 2M Multifunction devices are designed for more specialised soldering tasks in the industrial manufacturing and service repair environments. The WD 2M control unit has dual outputs. The USB interface allows various ISO applications and the control of the station via external PC.
°C 400 Automatic tool recognition Heat-up time of Weller WMRP and WMRT The WD 1M and WD 2M control units automatically recognise the type of soldering tool connected and assigns the appropriate control parameter for that tool. This normally removes the need for recalibration. 350 300 250 200 150 WMRP / WMRT 100 Others 50 0 °C 2 4 6 8 10 12 14 SEC.
Control unit WD 1M Technical data WD 1M Dimensions: 134 x 108 x 147 mm (l x w x h) Mains voltage: 230V / 50/60 Hz; 120V / 50/60 Hz Power input: max.
Dual output control unit WD 2M Technical data WD 2M Dimensions: 134 x 108 x 147 mm (l x w x h) Mains voltage: 230V / 50/60 Hz; 120V / 50/60 Hz Power input: max.
RT soldering tips for WMRP soldering pencil connectable to WD 1M and WD 2M The RT soldering tips have an extremely short heat-up time (2 – 6 Sec). All component parts of the system, such as the sensor and heating element, are designed for optimum heat transfer. This ensures absolute efficiency in the utilization of the power provided by the supply unit. The recovery time is minimized. Changing soldering tips is quick, easy, and most importantly, requires no tools. Order No.
WMRT Micro Desoldering Tweezers for WD 1M, WD 2M The new WMRT desoldering tweezers, 80W/ 24V, feature twin parallel adjustable tiplets which allows the soldering and desoldering of very small SMD components. The The new Weller control units automatically recognise the type of soldering tool when it is connected and assigns the appropriate control parameter for that tool. This normally removes the need for recalibration.
Weller flexibility Refer to the matrix on page 17 to make your choice of connecting tools for the stations.
WMP Micro soldering pencil set WMRP Soldering pencil set WMP 005 29 179 99 WMRP 005 29 190 99 consists of: WMP 005 15 122 99 WMP Micro Soldering Iron 65 W, 24 V with soldering tip NT 1 WDH 20 Comfort safety rest consists of: 005 29 171 99 WMRP 005 15 156 99 WDH 50 005 44 603 99 RT 3 Soldering pencil for RT soldering tips Safety rest with Stop+Go Function for soldering iron WMRP RT 3 soldering tip 40 W The 65 W micro pencil is up to the task with superior performance for both heat-up and therma
Weller flexibility Refer to the matrix on page 17 to make your choice of connecting tools for the stations. WST 20 Thermal wire stripper with Safety rest WST 82 Thermal wire stripper with Safety rest WST 20 005 25 030 99 WST 82 005 25 031 99 The WST 20, 50 W/24 V, copes with all known thermo-elastic plastics. Adjustable for a stripping length up to 30 mm. Additional blades avail-able for stripping flat cables and shrinking. The WST 82 is the 80 W version of the WST 20.
Survey standard tip Tool Station Refer to the matrix to make your choice of connecting tools to the stations.
LT Soldering Tips Soldering Tips for WP 80, WSP 80, MPR 80 and FE 75 WSP 80 (FE) WP 80 MPR 80 Type Description Width A Thickness B max.
Soldering Tips for WP 80, WSP 80, MPR 80 and FE 75 (continued) Type Description Width A LT 1L LT S Conical long Conical long Ø 0,2 mm Ø 0,4 mm 26,4 mm 21,0 mm 005 44 423 99 005 44 406 99 LT 1LX Conical long bent Ø 0,2 mm 26,4 mm 005 44 424 99 LT GW Gull wing 45° Ø 2,3 mm 18,8 mm 005 44 410 00 LT KN Knife tip 6,2 mm 16,0 mm 005 44 479 00 Measuring tip for thermo element Ø 0,5 mm 13,0 mm 005 44 416 00 LT Screw in tip with M4 outside thread Thickness B max.
WR 3M – Das High-End Multitalent WR 3M Station Hot Air Fume Extraction Desoldering & Rework Stations Erem Catalogue Erem 2400 MagicSense BGA/QFP Repair For more information please contact us! © 2007, Cooper Industries, Inc. Weller is a registered trademark and registered design of Cooper Industries Inc. G E R M A N Y G R E A T Cooper Tools GmbH Carl-Benz-Str. 2 74354 Besigheim Tel: (07143) 580-0 Fax: (07143) 580-108 Cooper Tools A Division of Cooper (GB) Ltd.
