Datasheet

PROFESSIONAL

Product Information

WFE Fume extraction unit

Product no.: T0053640299N

Benefits

Maintenance free compressed air

converter

For industrial long term use

Up to 2 FE soldering irons can be

connected

High stability against overturning

A compressed air cleaning filter

removes additional odours caused by

the compressed air.

The fume extraction unit WFE requires

clean and oil-free compressed air. The

vacuum is generated by a

maintenance-free compressed air

converter. The contaminated air is

purified by a pre-filter and main filter

system. A compressed air cleaning

filter removes additional odours

caused by the compressed air. This

highly efficient filter system makes the

WFE a genuine air recovery system.

The FE (Fume Extraction) soldering

irons are connected directly to the

unit – additional leads are not

required.

For this purpose, we recommend:

Solder fume extractors Soldering irons Cleaning Pre-heating plates

PAGE 1
PROFESSIONAL Product Information WFE Fume extraction unit Product no.: T0053640299N Benefits Maintenance free compressed air converter For industrial long term use Up to 2 FE soldering irons can be connected High stability against overturning A compressed air cleaning filter removes additional odours caused by the compressed air. The fume extraction unit WFE requires clean and oil-free compressed air. The vacuum is generated by a maintenance-free compressed air converter.
PAGE 2
PROFESSIONAL Product Information Technical Data Dimensions L x W x H (mm) 140 x 140 x 200 Dimensions L x W x H (inches) 5,51 x 5,51 x 7,87 Weight (approx.) in kg 2.7 Voltage --- Power 6 bar Operating pressure in bar/psi 3,5 - 6,0 / 50 - 90 Air consumption l/min 30 Noise level (distance 1 m) dB(A) < 39 Max. vacuum 20.000 Max.