Datasheet

Product-Information
WELLER WDC - Dry Cleaner
The solution for Cleaning from Leadfree Solder
For further information please contact:
Cooper Tools GmbH
Carl-Benz-Str. 2 Tel.: 07143 / 580 - 0
74354 Besigheim, Deutschland Fax: 07143 / 580 - 108
E-mail: [e-mail] www.cooperhandtools.com/europe
When using leadfree it will be experienced an increased oxydation in the
wettable area of the tip. These oxydes must be removed regularly otherwise
it will make the tip completely unwettable and not usable anymore. The
conventional method for cleaning with a wet sponge may shorten the life
time of the tip caused by cooling down the tip through shock effect.
When cleaning the tip by means of the Weller WDC Dry Cleaner
a special metal wool is used. First the surplus solder is removed
by tapping the tip on the soft edge of the collector box.
The final cleaning is then done by pushing and turning the tip
in the metal wool. After cleaning there is still a fine rest of
solder on the tip avoiding fast oxydation of the iron layer
which is an advantage versus the cleaning by the wet sponge.
The metal wool can be soaked in flux which may improve
even the performance. The Housing is antistatic.
Order No: 005 15 124 99
Metal wool WDC Spare (2 pcs)
Order No: 005 13 824 99