Datasheet

www.weller-tools.com
weller-tools.com
Weller
®
is a registered trademark of Apex Brands, Inc. © 2022 | Specifications subject to change without notice.
www.weller-tools.com/wxsmart
The Weller WCTH Storage Unit keeps Weller Cartridge Tips easily accessible, tips stored safely, and the workbench organized.
The tip holder is compatible for all Weller Active RT Tips (Cartridge Tips).
KEY FEATURES
> FULL VISIBLE
All soldering tips are placed upright and therefore fully
visible with tip styles and sizes.
> CLEARED UP
Your workbench is clean and organized with the
WCTH storage device. Up to 16 active Weller RT soldering
tips can be handled.
> SAFELY STORED
Place your preferred tips and your hot soldering tips
always in the same order to handle your jobs safely and
correctly.
> COMPATIBLE
All Weller active RT Tip Series can be stored.
> ESD SAFE
The WCTH tip holder is fully ESD safe
> DIMENSION
L x W x H 9,0 x 6,5 x 4,8 cm
WCTH
TIP HOLDER
KEEPS YOUR
WORKBENCH CLEAN
ORDER NO: T0053450299
www.weller-tools.com
weller-tools.com
Weller
®
is a registered trademark of Apex Brands, Inc. © 2022 | Specifications subject to change without notice.
www.weller-tools.com/wxsmart
The Weller WCTH Storage Unit keeps Weller Cartridge Tips easily accessible, tips stored safely, and the workbench organized.
The tip holder is compatible for all Weller Active RT Tips (Cartridge Tips).
KEY FEATURES
> FULL VISIBLE
All soldering tips are placed upright and therefore fully
visible with tip styles and sizes.
> CLEARED UP
Your workbench is clean and organized with the
WCTH storage device. Up to 16 active Weller RT soldering
tips can be handled.
> SAFELY STORED
Place your preferred tips and your hot soldering tips
always in the same order to handle your jobs safely and
correctly.
> COMPATIBLE
All Weller active RT Tip Series can be stored.
> ESD SAFE
The WCTH tip holder is fully ESD safe
> DIMENSION
L x W x H 9,0 x 6,5 x 4,8 cm
WCTH
TIP HOLDER
KEEPS YOUR
WORKBENCH CLEAN
ORDER NO: T0053450299
www.weller-tools.com
weller-tools.com
Weller
®
is a registered trademark of Apex Brands, Inc. © 2022 | Specifications subject to change without notice.
KEY FEATURES
Weller’s WCU is a compact stand-alone high-precision temperature measurement device for quick and accurate temperature
measurement. The WCU unit is strategically designed for users that need to measure fast and easy, while maintaining the
highest level of accuracy. It comes with a large, non-backlite display.
WCU
HIGH-PRECISION TEMPERATURE
MEASUREMENT DEVICE
ORDER NO: T0053450199
> HIGH-PRECISION TEMPERATURE MEASUREMENT DEVICE
Quick and accurate temperature measurements
> INTUITIVE NAVIGATIION
Digital display for fast temperature unit change between °C and °F,
and other functionalities. Values are easily readable from the large
non-backlite display.
> FAST AND EASY MEASUREMENT
Effortlessly auto-calibrate in less than 10 seconds, ensuring the
operator can focus on the important soldering task with a precise
temperature for best productivity.
The Auto-Calibration function can be used with:
WX 1, WX 2, WXD 2, WXA 2, WXR 3, WXsmart
NOTE: For the Auto-Calibration function a RS 232 cable
(order number: T0058764710) needs to be purchased separately
> HIGH-MOBILITY
The compact designed, battery-powered Weller High Precision
Temperature Measurement Device can easily be shared between
different workstations
> SIMULTANEOUS USE OF THERMOCROSS AND THERMOCOUPLE
Keep track of soldering tip and soldering bath temperatures
simultaneously
(Weller Thermocouple Type K Ø 0,1 mm T0058755782)
(Weller Thermocouple Type K Ø 0,5 mm T0053119099)
> TEMPERATURE MEASUREMENT COUNT FUNCTION
Number of tip temperature measurement will be automatically
counted. This function can be useful for control of changing sensor.
> MAX HOLD FUNCTION
The WCU display will show/hold the maximum temperature
measured.
TECHNICAL DATA WCU
Temperature measuring range Thermocross
0°C – 400°C 32°F – 752°F
Temperature measuring range Type-K/Thermocouple
150°C – +1200°C 302 °F – +2192 °F
Applicable sensor
K (CA) type thermocouple
Measuring tolerance
±3 °C (between 300 and 600 °C) ±6 °F (between 572 and 1112 °F)
Energy supply
9 V Dry battery Alkaline cell recommended.
Recommended battery Ansmann XPower alkaline battery 9V E-block
Dimensions
L x W x H 138 x 73 x 43 mm
Weight
120 g (Without battery)
Ambient temperature
0 °C – 40 °C
Air humidity range
max. 80% Relative air humidity, without condensation
Ambient conditions
Applicable pollution degree 2 (According to IEC/ UL61010-1)
> LOW ENERGY CONSUMPTION
Auto Turn-off Timer saves battery life shutting down the unit’s power
after 10 mins without use.
Different grounding possibilities, ex works = hard grounding
> WCU REPLACEMENT SENSOR
0 pcs. T0058771712
> ESD Safe
The Weller WCU Temperature Measurement Device is fully ESD safe
www.weller-tools.com/wxsmart
The antistatic ESD premium soldering mats from Weller are heat- and solder-resistant and have an antireflective sur-
face. The ESD mats feature two 10 mm press studs and rounded corners. ESD mats are primarily used to protect electronic
circuit boards and other electronic products against damage from electrostatic charges, and thus prevent expensive rework.
Static control is paramount for electronic assembly and production.
More Information: www.weller-tools.com
ANTISTATIC
ESD PREMIUM
WORK STATION
SOLDERING MAT
SUITABLE FOR LEFT
& RIGHT HANDS
Incl. two 10 mm press stud connectors
LARGE WORK SURFACE
600 mm x 900 mm
RESISTANT
Heat, solder, chemical and oil-resistant
TESTED
RoHS-compliant
ESD
Double-layer table mat
(dissipative / conductive)
DURABLE
Permanently elastic, abrasion-resistant
and comfortable
EYE SAFETY
Anti refl ective surface
gets the job done faster
BLEEDER RESISTANCE
10
6
– 10
8
Ohms
Order No.: T0051403599
More Information: www.weller-tools.com
ANTISTATIC
ESD PREMIUM
WORK STATION
SOLDERING MAT
SUITABLE FOR LEFT
& RIGHT HANDS
Incl. two 10 mm press stud connectors
LARGE WORK SURFACE
600 mm x 900 mm
RESISTANT
Heat, solder, chemical and oil-resistant
TESTED
RoHS-compliant
ESD
Double-layer table mat
(dissipative / conductive)
DURABLE
Permanently elastic, abrasion-resistant
and comfortable
EYE SAFETY
Anti refl ective surface
gets the job done faster
BLEEDER RESISTANCE
10
6
– 10
8
Ohms
Order No.: T0051403599
More Information: www.weller-tools.com
ANTISTATIC
ESD PREMIUM
WORK STATION
SOLDERING MAT
SUITABLE FOR LEFT
& RIGHT HANDS
Incl. two 10 mm press stud connectors
LARGE WORK SURFACE
600 mm x 900 mm
RESISTANT
Heat, solder, chemical and oil-resistant
TESTED
RoHS-compliant
ESD
Double-layer table mat
(dissipative / conductive)
DURABLE
Permanently elastic, abrasion-resistant
and comfortable
EYE SAFETY
Anti refl ective surface
gets the job done faster
BLEEDER RESISTANCE
10
6
– 10
8
Ohms
Order No.: T0051403599
> SIZE 600 MM X 900 MM > INCL. TWO 10 MM PRESS STUD CONNECTORS
> CHEMICAL- AND OIL-RESISTANT
> PERMANENTLY ELASTIC,
ABRASION-RESISTANT AND COMFORTABLE
> ROHS-COMPLIANT
> ANTIREFLECTIVE SURFACE
MAKES YOUR WORK EASIER
> DOUBLE-LAYER ESD TABLE MAT
(DISSIPATIVE / CONDUCTIVE)
> TYPICAL BLEEDER RESISTANCE
10
6
–10
8
OHMS
> HEAT- AND SOLDER-RESISTANT