SDS
Table Of Contents
- 1.2. Intended Use of the Product
- 1.4. Emergency Telephone Number
- 2.1. Classification of the Substance or Mixture
- GHS-US/CA Classification
- GHS-US/CA Labeling
- 2.3. Other Hazards
- 2.4. Unknown Acute Toxicity (GHS-US/CA)
- 3.1. Substance
- 3.2. Mixture
- 4.2. Most Important Symptoms and Effects Both Acute and Delayed
- 4.3. Indication of Any Immediate Medical Attention and Special Treatment Needed
- 5.1. Extinguishing Media
- 5.2. Special Hazards Arising From the Substance or Mixture
- 5.3. Advice for Firefighters
- 6.1. Personal Precautions, Protective Equipment and Emergency Procedures
- 6.1.1. For Non-Emergency Personnel
- 6.2. Environmental Precautions
- 6.3. Methods and Materials for Containment and Cleaning Up
- 6.4. Reference to Other Sections
- 7.1. Precautions for Safe Handling
- 7.3. Specific End Use(s)
- 8.1. Control Parameters
- 12.1. Toxicity
- 12.2. Persistence and Degradability
- 12.3. Bioaccumulative Potential
- 12.4. Mobility in Soil
- 15.1. US Federal Regulations
- 15.2. US State Regulations
- 15.3. Canadian Regulations
WSW SAC L0 / WSW SAC M1 - Solder Wire lead free Sn3.0Ag0.5Cu Flux L0/M1
Safety Data Sheet
According To Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules And Regulations And According To The Hazardous Products Regulation (February 11, 2015).
09/15/2021
EN (English US)
3/9
SECTION 5: FIRE-FIGHTING MEASURES
5.1. Extinguishing Media
5.2. Special Hazards Arising From the Substance or Mixture
5.3. Advice for Firefighters
Precautionary Measures Fire: Exercise caution when fighting any chemical fire.
Firefighting Instructions: Use water spray or fog for cooling exposed containers.
Protection During Firefighting: Do not enter fire area without proper protective equipment, including respiratory protection.
Hazardous Combustion Products: Metallic oxides. Carbon oxides (CO, CO
2
).
Other Information: Do not allow run-off from fire fighting to enter drains or water courses.
5.4. Reference to Other Sections
Refer to Section 9 for flammability properties.
SECTION 6: ACCIDENTAL RELEASE MEASURES
6.1. Personal Precautions, Protective Equipment and Emergency Procedures
General Measures: Do not breathe dust. Do not get in eyes, on skin, or on clothing.
6.1.1. For Non-Emergency Personnel
Protective Equipment: Use appropriate personal protective equipment (PPE).
Emergency Procedures: Evacuate unnecessary personnel.
6.1.2. For Emergency Personnel
Protective Equipment: Equip cleanup crew with proper protection.
Emergency Procedures: Upon arrival at the scene, a first responder is expected to recognize the presence of dangerous goods,
protect oneself and the public, secure the area, and call for the assistance of trained personnel as soon as conditions permit.
Ventilate area.
6.2. Environmental Precautions
Prevent entry to sewers and public waters. Avoid release to the environment.
6.3. Methods and Materials for Containment and Cleaning Up
For Containment: Contain solid spills with appropriate barriers and prevent migration and entry into sewers or streams.
Methods for Cleaning Up: Clean up spills immediately and dispose of waste safely. Take up mechanically (sweeping, shovelling) and
collect in suitable container for disposal. Contact competent authorities after a large spill.
6.4. Reference to Other Sections
See Section 8 for exposure controls and personal protection and Section 13 for disposal considerations.
SECTION 7: HANDLING AND STORAGE
7.1. Precautions for Safe Handling
Additional Hazards When Processed: Inhalation of fumes may cause metal fume fever.
Precautions for Safe Handling: Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking
and when leaving work. Avoid prolonged contact with eyes, skin and clothing. Avoid breathing dust.
Hygiene Measures: Handle in accordance with good industrial hygiene and safety procedures.
7.2. Conditions for Safe Storage, Including Any Incompatibilities
Technical Measures: Comply with applicable regulations.
Storage Conditions: Keep container closed when not in use. Store in a dry, cool place. Keep/Store away from direct sunlight,
extremely high or low temperatures and incompatible materials.
Incompatible Materials: Strong acids, strong bases, strong oxidizers.
7.3. Specific End Use(s)
Solder Wire
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1. Control Parameters
Suitable Extinguishing Media: For metal fires, dry sand, graphite, or dry table salt may be used.
Unsuitable Extinguishing Media: Halons. Water. Foam. Carbon dioxide (CO2).
Fire Hazard: Not considered flammable but may burn at high temperatures.
Explosion Hazard: Product is not explosive.
Reactivity: Hazardous reactions will not occur under normal conditions. May form explosive hydrogen gas on contact with acids.