Datasheet

83
Soldering Irons and Tips
Electronically Controlled Low Voltage Soldering Irons
Soldering Irons and Tips
WMRP Mirco soldering pencil soldering set for WMRS, WD 1M, WD 2M and WR 3M
Soldering pencil WMRP can not be used for control units WD 1 / WD 2.
Order No. Model Description
005 29 190 99 WMRP Soldering set
Consists of:
005 29 171 99 WMRP Soldering pencil for RT soldering tips
005 15 156 99 WDH 50 Safety rest with stop+go function
005 44 603 99 RT3 RT3 soldering tip 40 W
Accessory:
005 87 518 16 Bracket can be plugged sideward into the stand
and hold two RT-tips.
Soldering Tips for WMRP
Order No. Model Description
005 44 601 99 RT 1 Needle tip Ø 0,2 mm, 40 W
005 44 612 99 RT 1SC Chisel tip 0,4 x 0,15 mm, 40 W
005 44 602 99 RT 2 Point tip Ø 0,8 mm, 40 W
005 44 603 99 RT 3 Chisel tip 1,3 x 0,4 mm, 40 W
005 44 604 99 RT 4 Chisel tip 1,5 x 0,4 mm, 40 W
005 44 605 99 RT 5 Chisel tip bent 30° 0,8 x 0,4 mm, 40 W
005 44 606 99 RT 6 Round form 45° sloped 1,2 mm, 40 W
005 44 607 99 RT 7 Knife tip 45° sloped 2,2 mm, 40 W
005 44 608 99 RT 8 Chisel tip 2,2 x 0,4 mm, 40 W
005 44 609 99 RT 9 Chisel tip 0,8 x 0,4 mm, 40 W
005 44 610 99 RT 10GW Gull wing 1,2 x 2,0 mm, 40 W
005 44 611 99 RT 11 Chisel tip 3,6 x 0,9 mm, 40 W
005 44 613 99 RT Measuring tip