SDS

SAMSUNG SDI Co., Ltd.
Date: Aug 28th, 2018 Revision no.: 00
Nspire(P11P35-09-N01)
Page 3 of 10
Potential Health Effect(s):
Acute (short term): see Section 8 for exposure controls.
In the event that this cell or pack has been ruptured, the electrolyte solution contained within the
cell would be corrosive and can cause burns to skin and eyes.
Inhalation: Inhalation of materials from a sealed cell is not an expected route of exposure. Vapors
or mists from a ruptured cell may cause respiratory irritation.
Ingestion: Swallowing of materials from a sealed cell is not an expected route of exposure.
Swallowing the contents of an open cell can cause serious chemical burns to mouth, esophagus,
and gastrointestinal tract.
Skin: Contact between the cell and skin will not cause any harm. Skin contact with the contents of
an open cell can cause severe irritation or burns to the skin.
Eye: Contact between the cell and the eye will not cause any harm. Eye contact with the contents
of an open cell can cause severe irritation or burns to the eye.
CHRONIC (long term): see Section 11 for additional toxicological data.
Interactions with other chemicals: Immersion in high conductivity liquids may cause corrosion and
breaching of the cell or battery enclosure. The electrolyte solution inside of the cells may react with
alkaline (basic) materials and present a flammability hazard.
Potential Environmental Effects: Not Available.
3. Composition/information on ingredients
Hazardous components
Chemical Name
CAS No.
*Mass range in cell (g/g %)
Electrolyte salt
Lithium hexafluorophosphate
21324-40-3
0.05 - 5
Electrolyte
solvent
Includes one or more of the following;
1,2-Propylene Carbonate
Carbonic acid diethyl ester
1,3-Dioxolan-2-one
1,3-Propanesultone
108-32-7
105-58-8
96-49-1
1120-71-4
4
9
9
0.5
PVDF
Ethene, 1,1-difluoro-, homopolymer
24937-79-9
1
Copper
Copper
7440-50-8
3 - 15
Aluminium
Aluminium
7429-90-5
2 - 10
Cathode
Cobalt lithium oxide,(CoLiO2)
12190-79-3
20 - 50
Anode
Graphite
7782-42-5
10 - 30
Nickel
Nickel
7440-02-0
1
Because of the cell structure the dangerous ingredients will not be available if used properly.
During charge process a lithium graphite intercalation phase is formed.
4. First Aid Measures
Description of first aid measures
The hazardous components of this cell or battery are contained within a sealed unit. The following measures are only