SDS

SAMSUNG SDI Co., Ltd.
Date: Aug 28th, 2018 Revision no.: 00
Nspire(P11P35-09-N01)
Page 2 of 10
2. Hazards Identification
※ This is a product that fulfills a certain function in solid state with specific shape without discharging any
chemical substance in its use and has no obligation to write (M)SDS. Since this document contains the
precautions for safe handling related to its materials or chemical substances consisting of this product,
please note that these overall information is irrelevant to this product.
2.1 Classification of the substance or mixture
2.1.1 Classification according to Regulation (EC) No. 1272/2008 [CLP] and OSHA 29 CFR 1910.
1200 : Not classified
2.1.2 Additional information:
Classification of the substance or mixture.
Preparation Hazards and Classification: The product is a Lithium ion cell or battery and is
therefore classified as an article and is not hazardous when used according to the recommendations
of the manufacturer. The hazard is associated with the contents of the cell or battery. Under
recommended use conditions, the electrode materials and liquid electrolyte are non-reactive
provided that the cell or battery integrity remains and the seals remain intact. The potential for
exposure should not exist unless the cell or battery leaks, is exposed to high temperatures or is
mechanically, electrically or physically abused/damaged. If the cell or battery is compromised and
starts to leak, based upon the battery ingredients, the contents are classified as Hazardous.
Hazardous Materials Information Label (HMIS)
Health: Not available
Flammability: Not available
Physical Hazard: Not available
NFPA Hazard Ratings
Health: Not available
Flammability: Not available
Reactivity: Not available
2.2 Label elements
Hazard pictograms : Not applicable
Signal word : Not applicable
Hazard statement : Not applicable
Precautionary statements: Not applicable
Supplemental Hazard information (EU) : Not applicable
2.3 Other hazards :
Appearance, Color and Odor: Solid object with no odor.
Primary Routes(s) of Exposure: These chemicals are contained in a sealed enclosure. Risk of
exposure occurs only if the cell or pack is mechanically, thermally, electrically or physically abused to
the point of compromising the enclosure.
If this occurs, exposure to the electrolyte solution contained within can occur by inhalation, ingestion,
eye contact and skin contact.