Instructions / Assembly

WALL$ART$PANELS$INSTALLATION$INSTRUCT IO N $
$
!
1. Select!any!configuration!of!the!wall!art!
panels!on!the!wall:!one!line,!square,!
abstract,!etc.!
!
!
2. Using!a!level,!draw!a!line!on!the!wall!or!
mark!the!position!for!the!top!edge!of!the!
panels.!
!
!
!
!
!
3. Use!1!in.!or!1.25!in.!long!standard!nails!#!16!
or!#!14,!or!use!standard!hooks!for!artworks.!
Step!down!5!inches!from!the!top!edge!mark!
of!the!panel!and!position!the!nail!or!hanger!
in!the!potential!middle!of!the!panel.!
!
!
!
!
4. Please!consider!the!following:!
- The!thickness!of!the!backing!planks!is!
approximately!¼!inch,!so!ideally!the!
hook!or!nail!should!be!protruding!at!¼!
inch!from!the!wall.!
- The!weight!of!one!panel!is!2!lbs.!!
- If!you!consider!using!panels!as!a!
substrate!for!some!objects!with!the!
additional!weight,!hook!panels!on!two!
nails!or!hooks.!It’s!especially!important!
if!the!weights!of!the!objects!are!off-
center. !
!
!
5. To!attach!photos!to!the!wall!art!panel!use!
paper!pins!as!an!option.!
!
!