Installation guide



Wellav Technologies Ltd.
32
SMP260 Quick Installation Guide
V1.10-W
7. FAQ
Problem Possible Reasons What to do
The LCD display on the front
panel does not light up.
No power.
Check whether the power
cord is plugged into the
power socket.
No Signal output
Parameters are not
properly configured.
Check the parameters
configuration
No signal
Check the source and other
factors that affect the signal
reception.
The cables are not
connected
Check the connection and
make sure the connection is
well.
Cannot have access to the
equipment through NMS
IP setting
Check whether the
management PC IP and the
equipment IP have been set
to be in same section.
Network cable problem
Make sure the cable is good
one and connect well to the
equipment management
port.