Installation guide



Wellav Technologies Ltd.
25
SMP260 Quick Installation Guide
V1.10-W
ConstantRate(Mbit) Set constant bitrate for output
MaxRate(Mbit) Set max bitrate for output
MainRate(Mbit) Set min bitrate for output
6.3.3 Program IN/OUT configuration in “Program Info” tab
Operation Buttons
a) Transfer button: to transfer the selected stream/PID from the input
program window to the output program window.
b) Set button: to apply the changes to the NMS. The setting will lose if
the NMS is close or the equipment is powered off.
c) To obtain/refresh the current parameters status of the equipment
mainboard.
d) To save the configuration. The saved data can be kept after NMS is
closed or the equipment power off.
e) Import a configuration file.
f) Export the current settings of the equipment and save as a
configuration file.
g) To eliminate all the settings in the input and output window.
Input program configuration